Reference Guide

Index	Search	Glossary

Contents	Help

Control Panel

Selecting a Font and Pitch

You can select one of the printer's five fonts and pitch by using the buttons on the printer's control panel, as described below.

Note:

Settings you make in application programs usually override settings you make from the printer's control panel. For best results, use your application to select a font and make other settings.

The available pitch depends on the font you select. See the table below for more information.

Font	Pitch
USD	10, 12
HSD	10, 12, 15, 17, 20
Draft	10, 12, 15, 17, 20, PS
Roman	10, 12, 15, 17, 20, PS
Sans Serif	10, 12, 15, 17, 20, PS

Make sure that the printer is not printing. If it is, press the Pause button to stop printing.

Press the Font button until the two Font lights indicate the desired font as shown below.

		USD
		HSD
		Draft
		Roman
		Sans Serif

=on,

=off,

=flashing

Press the Pitch button until the two Pitch lights indicate the desired pitch as shown below.

		10 cpi
		12 cpi
		15 cpi
		17 cpi
		20 cpi
		PS

=on,

=off,

=flashing

Make sure that the desired font and pitch are selected.

[Top]