EPSON ESC/P control codesIBM PPDS emulation control codesProduct Information
Your printer supports the following EPSON ESC/P control codes and IBM PPDS emulation control codes.
For more information about the commands, contact Epson Customer Services. See Contacting Customer Support for details.
Selecting an EPSON ESC/P printer in your software allows you to use advanced fonts and graphics.
|
General operation: ESC @, ESC U, ESC EM |
|
Paper feeding: FF, LF, ESC 0, ESC 2, ESC 3, ESC 1, ESC A, CR |
|
Page format: ESC (C, ESC C, ESC C 0, ESC Q, ESC l, ESC (c, ESC N, ESC O, ESC (U |
|
Print position motion: ESC $, ESC \, ESC D, HT, ESC B, VT, ESC J |
|
Font selection: ESC k, ESC x, ESC y, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F, ESC ! |
|
Font enhancement: ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC - |
|
Spacing: ESC Space |
|
Character handling: ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC I |
|
Bit image: ESC K, ESC L, ESC Y, ESC Z, ESC ^, ESC * |
|
Bar code: ESC ( B |
This printer emulates the IBM Proprinter using the commands below.
|
General operation: NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F |
|
Paper feeding: FF, LF, ESC 5, ESC A, ESC 0, ESC 1, ESC 2, ESC 3, CR, ESC ] |
|
Page format: ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4 |
|
Print position motion: ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J |
|
Font selection: DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I |
|
Font enhancement: DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _ |
|
Spacing: BS, SP |
|
Character handling: ESC 6, ESC 7, ESC [ T, ESC ^, ESC \ |
|
Bit image: ESC K, ESC L, ESC Y, ESC Z |
|
Bar code: ESC [f, ESC [p |
|
Download: ESC = (draft mode only) |
 Previous |
 Next |
