Product Information

Printer Specifications

Mechanical
Electronic
Electrical
Environmental
Paper
Printable area

Mechanical

Printing method:	9-pin impact dot matrix
Printing speed:	High speed draft	1550 cps at 10 cpi
	Draft	1320 cps at 10 cpi
	NLQ	330 cps at 10 cpi
Printing direction:	Bidirectional logic seeking for text and graphics printing. Unidirectional text or graphics printing can be selected using software commands.
Line spacing:	1/6-inch or programmable in 1/432-inch increments
Printable columns:	136 columns (at 10 cpi)
Resolution:	Maximum 240 x 144 dpi (NLQ)
Paper feed methods:	Push tractor (front, rear) Push and pull tractor (additional tractor is required) (front, rear)
Paper feed speed:	Continuous	381 mm/second 15 inches/second
Paper feed speed:	Intermittent	25 msec/line at 1/6 inch line spacing
Reliability:	Total print volume	133 million lines (except print head) MTBF 20,000 POH (25% duty)
Reliability:	Print head life	200 million strokes/wire approx. 400 million characters (Draft, 10 cpi, 14 dots/character)
Dimensions and weight:	Height	363 mm (14.3 inches)
	Width	700 mm (27.6 inches)
	Depth	378 mm (14.9 inches)
	Weight	approx. 34 kg (75 lb)
Ribbon:	Black ribbon cartridge	S015384
Ribbon:	Ribbon life	approx. 15 million characters (Draft, 10 cpi, 14 dots/character)
Acoustic noise:	Approx. 58 dB (A) (ISO 7779 pattern)

[Top]

Electronic

Interfaces:	One standard bidirectional, 8-bit, parallel interface with IEEE 1284 nibble mode support, one USB (ver 1.1) interface and one optional Type B interface slot
Buffer:	128KB
Fonts:	Bitmap fonts
	Bar code fonts
	EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET
Character tables:	Standard One italic and 12 graphics character tables: Italic table, PC 437 (US, Standard Europe), PC 850 (Multilingual), PC 860 (Portuguese), PC 861 (Icelandic), PC 865 (Nordic), PC 863 (Canadian-French), BRASCII, Abicomp, ISO Latin 1, Roman 8, PC 858, ISO 8859-15 Expanded One italic and 38 graphics character tables: Italic table, PC 437 (US, Standard Europe), PC 850 (Multilingual), PC 860 (Portuguese), PC 861 (Icelandic), PC 865 (Nordic), PC 863 (Canadian-French), BRASCII, Abicomp, ISO Latin 1, Roman 8, PC 858, ISO 8859-15, PC 437 Greek, PC 852 (Eastern Europe), PC 853 (Turkish), PC 855 (Cyrillic), PC 857 (Turkish), PC 866 (Russian), PC 869 (Greek), MAZOWIA (Poland), Code MJK (CSFR), ISO 8859-7 (Latin/Greek), ISO Latin 1T (Turkish), Bulgaria (Bulgarian), PC 774 (LST 1283: 1993), Estonia (Estonian), PC 771 (Lithuanian), ISO 8859-2, PC 866 LAT. (Latvian), PC 866 UKR (Ukranian), PC437 Slovenia, PC MC, PC1250, PC1251, PC APTEC (Arabic), PC 708 (Arabic), PC 720 (Arabic), PC AR 864 (Arabic)
Character sets:	13 international character sets and one legal character set: USA, France, Germany, UK, Denmark I, Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain II, Latin America, Legal

[Top]

Electrical

Rated voltage range:	100 to 240 V
Input voltage range:	90 to 264 V
Rated frequency range:	50 to 60 Hz
Input frequency range:	49.5 to 60.5 Hz
Rated current:	5.4 A (maximum 11 A)
Power consumption:	Approx. 185 W (ISO/IEC 10561 letter pattern) Approx. 7.5 W in sleep mode

[Top]

Environmental

	Temperature	Humidity (without condensation)
Operation (plain paper)	5 to 35°C (41 to 95°F)	10 to 80% RH
Operation (recycled paper, envelope, label, or roll paper)	15 to 25°C (59 to 77°F)	30 to 60% RH
Storage	-30 to 60°C (-22 to 140°F)	0 to 85% RH

[Top]

Paper

Note:

Use recycled paper, labels, continuous forms with labels, and overlapping multi-part forms only under normal temperature and humidity conditions described below.

Temperature: 15 to 25°C (59 to 77°F)
Humidity: 30 to 60% RH

Do not load paper that is curled, folded, or crumpled.

Continuous paper (Single sheets and multi-part forms)

Use only continuous paper with less than 5 mm diameter punch holes.

The ratio of the cut/uncut length at the perforation should be between 2:1 and 5:1.

If the horizontal and vertical perforation cuts cross, do not print in the area illustrated below.

3 mm

28 mm

The thickness of the perforation part when extended should be 2 mm or less.

2 mm or less

The perforation between pages should not extend all the way to the edges of the paper. Uncut length on the edges should be 1 mm or more.

	A	paper edge
	B	uncut part
	C	cut part
	D	1 mm or more

When using pre-printed paper, the reflectance of the pre-printed color should be 60% or less.

When using pre-printed paper, do not use paper pre-printed in the area illustrated below.

	A	12 mm
	B	first dot
	C	Colored area should not be pre-printed.
	D	5 mm

Continuous paper (Single sheets):

Rear entry / Front entry

Minimum

Maximum

Width

(mm)

(inch)

76.2

419.1

16.5

Length

(mm)

(inch)

76.2

558.8

Thickness

(mm)

(inch)

0.065

0.0025

0.10

0.0039

Weight

(g/m²)

(lb)

Quality

Plain paper and recycled paper with point gluing or paper stapling on both sides

Continuous paper (Multi-part forms):

Rear entry

Front entry

Minimum

Maximum

Minimum

Maximum

Width

(mm)

(inch)

76.2

419.1

16.5

76.2

419.1

16.5

Length

(mm)

(inch)

76.2

558.8

76.2

558.8

Copies

1 original + 6 copies

1 original + 9 copies

Thickness

(mm)

(inch)

0.12

0.0047

0.53

0.021

0.12

0.0047

0.79

0.031

Weight

(g/m²)

(lb)

Quality

Carbonless or carbon-backed multi-part forms with point gluing or paper stapling on both sides

Do not load thick paper, such as multipart forms with more than seven parts, with the rear tractor.

Form sheets of continuos multi-part forms should be securely joined together along the left and right edges by crimping or spot-gluing. See the illustration below for details.

spot-gluing on both sides

25.4 mm (1 inch) or less

crimping on both sides

76.2 mm (3 inch) or less

printing side

spot-gluing and crimping on opposing sides

25.4 mm (1 inch) or less

76.2 mm (3 inch) or less

printing side

Do not use continuous multi-part forms that are joined with metal staples, one side crimping, tape-staples, or bar-gluing.

bar-gluing

metal stapling

Labels

Rear entry / Front entry

Minimum

Maximum

Width of backing sheet

(mm)

(inch)

76.2

419.1

16.5

Length of backing sheet

(mm)

(inch)

76.2

558.8

Thickness of backing sheet

(mm)

(inch)

0.07

0.0028

0.09

0.0035

Total thickness

(mm)

(inch)

0.16

0.0063

0.19

0.0075

Label weight

(g/m²)

(lb)

Quality

Plain paper or the same quality labels

Use only labels on continuous backing sheets.

Epson recommends using labels whose backing sheet is entirely covered with label material.

Labels whose backing sheet is entirely covered with label material:

	A	backing sheet
	B	label sheet
	C	label
	D	There should be several uncut areas on each side
	E	Corners should not be cut

Labels whose backing sheet is not covered with label material:

	A	backing sheet
	B	label
	C	63.5 mm (2.5 inches) or more
	D	23.8 mm (15/16 inch) or more
	E	R2.5 mm (0.1 inch) or more

Continuous forms with labels

Rear entry

Front entry

Minimum

Maximum

Minimum

Maximum

Width of backing sheet

(mm)

(inch)

76.2

419.1

16.5

76.2

419.1

16.5

Length of backing sheet

(mm)

(inch)

76.2

558.8

76.2

558.8

Total thickness

(mm)

(inch)

0.065

0.0025

0.53

0.021

0.065

0.0025

0.79

0.031

label

backing sheet

total thickness:
0.53 mm (0.021 inch) or less (Rear Entry)
0.79 mm (0.031 inch) or less (Front Entry)

continuous paper

labels paper

Overlapping multi-part forms

Rear entry

Front entry

Minimum

Maximum

Minimum

Maximum

Width of backing sheet

(mm)

(inch)

76.2

419.1

16.5

76.2

419.1

16.5

Length of backing sheet

(mm)

(inch)

76.2

558.8

76.2

558.8

Total thickness

(mm)

(inch)

0.13

0.0051

0.53

0.021

0.13

0.0051

0.79

0.031

	A	13 mm (0.51 inch) or more
	B	From the perforation to the bottom of the previous overlapping form: 13.3 mm (0.52 inch) or less
	C	From the perforation to the top of the next overlapping form: 3.3 mm (0.13 inch) or more
	D	From the perforation to the bottom edge of the glue point area: 17 mm (0.67 inch) or less
	E	Total thickness including glue point dilation: 0.53 mm (0.021 inch) or less (Rear Entry) 0.79 mm (0.031 inch) or less (Front Entry)

[Top]

Printable area

Note:

When you use paper that is less than 4 inches (101.6 mm) wide, the left margin is fixed at 13 mm (0.51 inch) regardless of paper type. Setting the left margin to larger than that may cause a defect when beginning on a new line or cause a skew.

When you use continuous paper with labels that is more than 16 inches (406.4 mm) wide while the optional pull tractor is installed, the left margin may be set to 18 mm (0.71 inch) or more.

When loading paper with the front tractor, set the Page length for front tractor setting to 6 inches or more.

Continuous paper

The minimum top and bottom margins (above and below the perforation) are 4.2 mm (0.17 inch).

The minimum left and right margins are 13 mm (0.51 inch).

Labels
	A	The minimum top margin is 2.2 mm (0.09 inch).
	B	The minimum left and right margins are 13 mm (0.51 inch).
	C	The minimum top and bottom margins on label are 2 mm (0.08 inch).
	D	The minimum left and right margins on labels are 3 mm (0.12 inch).

Continuous forms with labels
	A	The minimum top and bottom margins are 4.2 mm (0.17 inch).
	B	The minimum left and right margins are 13 mm (0.51 inch).
	C	The minimum top margin from labels is 20.2 mm (0.8 inch)
	D	The minimum bottom margin from labels is 16.6 mm (0.65 inch)
	E	The minimum left and right margins from labels are 30.9 mm (1.22 inches)
	F	The minimum top and button margins on labels are 2 mm (0.08 inch)
	G	The minimum left and right margins on labels are 3 mm (0.12 inch)

Overlapping multi-part forms
	A	The minimum top margin is 26.3 mm (1.04 inch)
	B	The minimum bottom margin is 16.6 mm (0.65 inch).
	C	The minimum left and right margins are 16 mm (0.63 inch).

[Top]