Reference Guide

Index Search Glossary Contents Help

Maintenance and Troubleshooting / Problems and Solutions

Software Problems

You cannot start EPSON Scan
The scanner software does not work properly

You cannot start EPSON Scan

Try one or more of the following solutions:

• Make sure the scanner is turned on.

• Turn off the scanner and the computer. Then check the connection between the scanner and the computer.

• Make sure that EPSON Scan is selected in your application software.

• In the Device Manager menu, make sure your scanner's name appears under Imaging devices hardware type without a question (?) or an exclamation (!) mark. If the scanner appears with a question (?) or an exclamation (!) mark, or as an Unknown devices hardware type, uninstall EPSON Scan. Then reinstall it following the instructions in your Start Here poster.

[Top]

The scanner software does not work properly

Try one or more of the following solutions:

• For Windows XP and Me users:
  Check if your scanner's icon appears more than once. To check, double-click the Scanners and Cameras icon in Control Panel. Remove your scanner's icon from the window, then reinstall EPSON Scan following the instructions in your Start Here poster.

• For Windows 98 SE and 2000 users:
  Check if your scanner is listed more than once in the Scanners and Cameras Properties dialog box. To view the dialog box, double-click the Scanners and Cameras icon in Control Panel. Remove your scanner from the list of installed devices, then reinstall EPSON Scan following the instructions in your Start Here poster.

• Make sure your computer meets the memory and other system requirements specified for the software you are using.

• Make sure the computer has enough memory for your software. If the computer does not have enough memory available, see your software and computer documentation for details.

[Top]

Previous

Next