Online Reference Guide

Index	Search	Glossary

Contents	Help

Product Information

Lights and Buttons

Lights
Buttons

The scanner provides four buttons for scanner operations. The Start button also lights up to indicate the scanner's status.

Note:

Most illustrations shown in this section are for the Perfection 1670 Photo, so they may be different in appearance from the Perfection 1670. The instructions are the same, except as noted.

1. Scan to Web button
2. Scan to E-mail button
3. Copy button
4. Start button

Lights

Light	Color	Indicator Status	Meaning
indicator	Green	On	Ready to scan images.
	Green	Flashing	Initializing or busy scanning.
	Red	Flashing	An error has occurred. See Error Indicator for more information.
	(None)	Off	The scanner is off.

[Top]

Buttons

Button	Function
Start	Scans and sends the captured image to an assigned application in a single step. Before using this feature, make sure you have installed EPSON Scan and EPSON Smart Panel software. See Using the Start Button for more details.
Copy	Scans and sends the captured image to the Copy utility in EPSON Smart Panel. Before using this feature, make sure you have installed EPSON Scan and EPSON Smart Panel. See Using the Copy Button for more details.
Scan to E-mail	Scans and sends an e-mail message with the scanned image attached. Before using this feature, make sure you have installed EPSON Scan and EPSON Smart Panel. See Using the Scan to E-mail Button for more details.
Scan to Web	Scans an image and uploads it to the EPSON photo-sharing site. Before using this feature, make sure you have installed EPSON Scan and EPSON Smart Panel. See Using the Scan to Web Button for more details.

[Top]