Online Reference Guide

Index	Search	Glossary

Contents	Help

Option

Film Holders

35 mm strip film
35 mm strip film (to be scanned from EPSON Photo Print)
120/220 (6 cm x 9 cm) film
4 x 5 inch film

Four film holders are included with this unit. To scan film, see the instructions below.

Caution:

Hold the film at the edges, or else use gloves. Touching the film surface with bare hands can leave fingerprints or other traces on the film.

Note:

The base side of the film is the side which the film maker's name and film ID numbers are shown.

35 mm strip film

Insert a strip of film in the 35 mm film holder, base side facing down.

[Top]

35 mm strip film (to be scanned from EPSON Photo Print)

Insert a strip of film in the 35 mm film holder for use with EPSON Photo Print, base side facing down. Slide the strip until all of the frame you wish to scan is positioned inside the film holder opening.

Note:

If you plan to scan transparent materials from EPSON Photo Print utility, refer to the EPSON Photo Print documentation for details.

[Top]

120/220 (6 cm x 9 cm) film

Insert film in the 120/220 (6 cm x 9 cm) size film holder, base side facing down.

[Top]

4 x 5 inch film

Insert film in the 4 x 5 inch film holder, base side facing down.

[Top]