Online Reference Guide

Index
Search
Glossary
Contents
Help

Scanning Basics

Using the Tone Curve

Saving your own tone curve
Deleting a customized tone curve
Closing the Tone Correction dialog box

The tone curve provides you with a versatile means for adjusting the intensity of colors of the image being scanned. You can adjust the shadow, mid-tone, and highlight values, which helps to ensure well-balanced coloring of the image.

Note:
  • Use of the tone curve is recommended for fine adjustments after you have previewed the image and adjusted the highlights and the shadows using the Auto Exposure and the Image Controls dialog box. Use of the tone curve to make initial settings is not recommended.
  • The Tone Correction button becomes unavailable if Black & White is selected from the Image Type dialog box list.

The tone curve is located in the Tone Correction dialog box, which appears when you click the Tone Correction button in the Preview window. The following section describes how to use each of the controls in the Tone Correction dialog box.


Tone Correction button

Tone Correction dialog box

Tone Curve Name list

Use this list box to select a preset tone curve. There following six preset tone curves are available, and you can add your own curves to the list using the procedure described in the next section, Saving your own tone curve.

Curve Name

Highlight

1/4 Tone

Midtone

3/4 Tone

Shadow

Description

Linear

245

192

128

64

8

Default curve

Lighten

245

193

133

74

4

Lightens dark image

Darken

245

152

82

38

11

Darkens bright image

Flat Contrast

245

182

129

72

2

Reduces contrast

High Contrast

245

204

129

51

2

Increases contrast

Open Shadow

245

193

129

80

5

Lightens dark shadows

When you select a curve from the Tone Curve Name list, the settings in the Tone Correction dialog box change accordingly.

Channels

Click an option button under channels to select the color whose tone curve you want to adjust. When the master channel at the top is selected, your adjustments affect all three colors. Selecting one of the other channels allows you to adjust red, green, or blue only.

Tone curve editor

Moving the pointer into the tone curve editor causes it to change to a finger. Use this pointer to drag any of the five points on the curve and change its shape. The x-axis of the curve is the brightness of the original (input values) while the y-axis is the brightness of the scanned image (output values).

To change the tone curve back to its default, select Linear from the Tone Curve Name list.

Output values

These are the current values for output data according to the current locations of the points inside the tone curve editor. These values change when you drag points in the tone curve editor, or you can enter values here to change the shape of the tone curve. Each value can be adjusted within the range of 0 to 255.

Note:
  • Each output value name has a check box to the left of it. Highlight and Shadow are always selected, but you can select or clear 1/4 Tone, Midtone, and 3/4 Tone by clicking their check boxes.
  • When a value's check box is clear, its point on the tone curve editor automatically shifts to smooth out the tone curve when one of the other points is moved.
  • When a value's check box is selected, it means that its point is fixed and it will not shift when other points are moved.

Saving your own tone curve

Use the following procedure to assign a name to a tone curve you have customized and want to save for later use.

Modify the tone curve settings as desired. The name shown in the Tone Curve Name list changes to User Defined.

After customizing the tone curve, enter a name for the new curve (up to 32 characters) in the list box.

Click Save to save your new tone curve settings.


[Top]

Deleting a customized tone curve

Use the following procedure to delete a custom tone curve. You cannot, however, delete the six preset tone patterns.

Select a custom tone curve from the Tone Curve Name list.

Click Delete.

When a dialog box appears, click Yes to delete the curve.


[Top]

Closing the Tone Correction dialog box

You can close the Tone Correction dialog box by clicking either OK or Cancel.


[Top]


Previous

Next
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION