 |
 |
|
||
 |
||||
Scanning Over a Network
Note:|
You must set the IP address for your Network Interface Panel before you can scan using it.
 Setting Up Client Computers with Epson Scan Settings
|
For Windows
 |
Turn on your scanner and the client computer.
|
 |
Place your original(s) on the document glass or ADF.
|
 |
Start Document Capture Pro.
|
 |
Click Scan on the Document Capture Pro Main window.
|
 |
Make necessary settings on Main Settings, and then click Scan.
|
If a group is set for the scanner, you cannot scan unless the same group is also set on the computer.
For Mac OS X
|
Turn on your scanner and the client computer.
|
|
Place your original(s) on the document glass or ADF.
|
|
Start Epson Scan.
|
|
Select your desired mode.
|
|
In the Epson Scan window, make the appropriate settings.
|
 |
Click Scan.
|