Administrator's Guide

Index
Search
Contents
Help

Installing Software

Installing EpsonNet WinAssist/MacAssist

Uninstalling EpsonNet WinAssist

Install the configuration utility software, EpsonNet WinAssist or EpsonNet MacAssist to configure the Internal Print Server for your network.

Note:
Before installing EpsonNet WinAssist, be sure to install any necessary protocols and services such as TCP/IP or NetBEUI. EpsonNet WinAssist may not open if you add or delete the protocols after installing EpsonNet WinAssist. If this happens, uninstall EpsonNet WinAssist and then reinstall it. See Uninstalling EpsonNet WinAssist for instructions on uninstalling EpsonNet WinAssist.

Windows:

Insert the software CD-ROM in the CD-ROM drive.

The EPSON Installation Program screen opens automatically.

If the EPSON Installation Program screen does not appear automatically, click Start and Run (Windows 98/95/NT 4.0); or choose Run from the File menu in the Program Manager (Windows NT 3.51). Then, enter D:\EPSETUP.EXE and click OK (substitute the appropriate drive letter if necessary).

Double-click Install EpsonNet WinAssist; or you can also install by selecting Install EpsonNet WinAssist and then clicking the arrow at the top right.

Follow the on-screen instructions to complete the installation.

To start EpsonNet WinAssist, click Start, point to Programs and EpsonNet WinAssist, then click EpsonNet WinAssist (Windows 98/95/NT 4.0); or double-click the EpsonNet WinAssist icon in the EpsonNet WinAssist window (NT 3.51).

Macintosh:

Insert the software CD-ROM in the CD-ROM drive.

The disk icon opens automatically. If the disk icon does not open automatically, double-click the disk icon. Then, double-click the EpsonNet MacAssist folder.

Drag the EpsonNet MacAssist icon to your hard disk.

To start EpsonNet MacAssist, double-click the EpsonNet MacAssist icon on your hard disk.

Uninstalling EpsonNet WinAssist

Follow the steps below to uninstall EpsonNet WinAssist.

Windows 98/95/NT 4.0

Double-click the Control Panel icon in the My Computer window.

Double-click the Add/Remove Programs icon.

Select EpsonNet WinAssist and click the Add/Remove button.

The message "Are you sure you want to completely remove the selected application and all of its components?" appears on the screen. Click Yes.

Windows NT3.51

Double-click the Uninstall icon in the EpsonNet WinAssist window.

The message "Are you sure you want to completely remove the selected application and all of its components?" appears on the screen. Click Yes.

The message "Uninstall successfully completed" appears on the screen. Click OK.


[Top]


Previous
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION