Network Guide
|
|
How To / Installing Components on Your Computer
Macintosh
Mac OS 8.x to 9.x
Mac OS X
To assign an IP address, subnet mask, etc. to your Macintosh, follow the steps below.
|
Note:
|
|
To print using the AppleTalk protocol and configure the print server with EpsonNet MacAssist, select Ethernet or Built-in Ethernet on the AppleTalk Control Panel or the AppleTalk tab. Then configure the print server with EpsonNet MacAssist.
|
|
Mac OS 8.x to 9.x
|
From the Apple menu, select Control Panel, and then TCP/IP.
|
|
Set Connect via to Ethernet.
|
|
Assign an IP address and other settings if necessary.
|
|
Close the dialog box to save any changes.
|
Go to the next chapter Connecting the Print Server to the Network.
[Top]
Mac OS X
|
From the Apple menu, select System Preferences.
|
|
Open the Network control panel. Click the TCP/IP tab.
|
|
Select Built-in Ethernet from the Show pull down menu.
|
|
Assign an IP address and other settings if necessary.
|
|
Click the Apply Now button to save any changes.
|
Go to the next chapter Connecting the Print Server to the Network.
[Top]
Version NPD0133-03, Copyright © 2003, SEIKO EPSON CORPORATION |