Administrator's Guide

						Index				Search

						Contents				Help

Introduction

Terms and Concepts

The following terms and concepts are defined here to help you understand this guide.

A configuration is a prepared set of conditions for proper operation of a device. Configuring the Internal Print Server is to prepare it to work with protocols available on a network.

A file server stores data required for the Internal Print Server to operate as a print server.

A print queue is where a print job is stored as a file, until the print server sends the job to the assigned printer.

A print server moves jobs from print queues to printers.

A remote printer is a shared printer connected elsewhere on the network, but under the control of a NetWare print server.

EtherTalk is AppleTalk's communication protocol governing Ethernet transmissions.

A protocol is a rule that controls how data or information is exchanged through a network. There are many different layers of protocols for different aspects of hardware and software operation. Computers and software cannot communicate with each other using different protocols.

TCP/IP (Transmission Control Protocol/Internet Protocol) is a layer of protocols that provides communications between nodes on a network.

ftp is a TCP/IP application protocol for file transfer.

lpd is a TCP/IP remote printing protocol application.

Internet Printing Protocol (IPP) is a protocol used for Internet printing. Using Internet Printing Protocol (IPP), users can print directly to a URL over an intranet or the Internet.

[Top]