Administrator's Guide

						Index				Search

						Contents				Help

Settings by System / Settings for Macintosh

Introduction to Macintosh Settings

This chapter describes how to configure the Internal Print Server in a Macintosh environment using EpsonNet MacAssist. You can also configure the Internal Print Server for AppleTalk using EpsonNet WinAssist from Windows environment.

After setting the IP address for the printer, you can also use EpsonNet WebAssist to configure the Internal Print Server.

Note:

You can configure for the Internal Print Server using EpsonNet MacAssist; however, the Adobe PostScript 3 Kit is needed to print from a Macintosh.

Do not use EPSON Namer with the Internal Print Server.

The correct printer driver must be installed.

The supported systems are as follows:

Macintosh OS:
Mac OS 9, 8.x, 7.6.x
System 7.5.x, 7.1

Apple network driver:
EtherTalk Phase 2
OpenTransport 1.1.1, 1.1.2, 1.3

Apple printer driver:
LaserWriter, LaserWriter 8

EPSON printer driver

[Top]