Reference Guide
|
|
Setup & Maintenance / Cleaning and Transporting the Printer
Transporting the Printer
If you need to transport your printer, carefully repack it using the original box and packing materials as follows:
|
Turn off the printer.
|
|
Unplug the power cord from the electrical outlet and then from the printer.
|
|
Disconnect all interface cables from the printer.
|
|
Remove all paper from the MP tray.
|
|
Remove or close the MP tray, depending on your printer model.
|
EPL-6200
Grasp the base part of the MP tray with both hands, pull the bottom edge outward, and pull it out of the printer.
EPL-6200L
|
Remove the optional 500-Sheet Lower Paper Cassette Unit A4 and/or Duplex Unit, if installed. (EPL-6200 only)
|
|
Replace the printer's protective materials, then repack the printer in its original box.
|
| |
Caution:
|
| |
Do not expose the photoconductor unit and the developer cartridge to light any longer than necessary.
|
|
[Top]
Version NPD2540-00, Copyright © 2008, SEIKO EPSON CORPORATION |