Control Panel

a

Memory

Usually turns on or flashes in combination with other lights to indicate a memory-related error or warning.

b

Toner

On when the printer's developer cartridge has run out of toner. Flashes to indicate that toner is running low. If this light is flashing, have a new developer cartridge ready.

c

Paper

Turns on or flashes, and when in combination with the Error light, usually indicates a paper-related problem. On usually indicates a paper jam, while flashing usually indicates a paper-related error or warning, such as when the paper source is empty.

d

Error

On or flashes when an error is detected.

e

Ready

On when the printer is ready, indicating that the printer is ready to receive and print data. When the printer is not ready, this light is off. This light also comes on in combination with other lights to indicate error situations.

f

Data

On when data is received and stored in the print buffer (the section of memory reserved for receiving data) but not yet printed. Flashing indicates that the printer is processing data. When no data remains in the print buffer, this light is off.

a

Start/Stop

Switches the printer between ready and offline status.

b

Job Cancel

Deletes the oldest print job stored in the printer. Deletes one job when pressed once. Pressing it down for more than two seconds deletes all data in the print buffer, all jobs, and all data the printer is receiving or currently printing.

c

Information

Prints status sheets when the Error light is off and no warning is indicated. Prints a status sheet when pressed once. If your printer is a network model, pressing this button for more than two seconds prints a network status sheet. Clears the warning when a warning is indicated.