|
|
Product Information / Technical Specifications
General
Environmental
Standards and approvals
Mechanical
Electrical
PostScript
Printing method: |
Laser beam scanning and dry electrophotographic process |
|
Resolution: |
EPL-6200: 1200 dpi, Class 1200 dpi, or 600 dpi, 300 dpi EPL-6200L: 600 dpi |
|
First print: |
Less than 13 seconds with A4/Letter paper (When feeding from MP tray) |
|
Paper feed: |
EPL-6200: Automatic or manual feed EPL-6200L: Automatic |
|
Paper feed alignment: |
Center alignment for all sizes |
|
Input paper supply (75 g/m2 paper): |
MP tray: |
EPL-6200: Up to 250 sheets of plain paper EPL-6200L: Up to 150 sheets of plain paper Up to 10 envelopes, depending on thickness |
Paper output: |
Face-down |
|
Paper output capacity (75 g/m2 paper): |
Up to 100 sheets of plain paper |
|
RAM: |
EPL-6200: 8 MB or 16 MB, expandable up to 136 MB or 144 MB EPL-6200 Network model: 16 MB, expandable up to 272 MB EPL-6200L: 2 MB |
Temperature: |
Operation: |
10 to 35°C (50 to 95°F) |
Humidity: |
Operation: |
15 to 85% RH |
Altitude: |
2,500 meters (8,200 feet) maximum |
Safety standards:
U.S. model: |
UL 60950 |
European model: |
Directive 73/23/EEC EN60950 |
EMC:
U.S. model: |
FCC part 15 subpart B class B |
European model: |
Directive 89/336 /EEC |
|
EN 55022 (CISPR Pub. 22) class B EN 55024 EN 61000-3-2 EN 61000-3-3 |
Australian model: |
AS/NZS 3548 class B |
Dimensions and weight: |
EPL-6200: |
Height: 261 mm (10.4 in.) |
EPL-6200L: |
Height: 261 mm (10.4 in.) |
|
Durability: |
5 years or 180,000 sheets, whichever comes first |
|
110 to 120 V Model |
220 to 240 V Model |
||
Voltage |
110 V - 120 V ± 10% |
220 V - 240 V ± 10% |
||
Rated frequency |
50 Hz - 60 Hz ± 3 Hz |
50 Hz - 60 Hz ± 3 Hz |
||
Rated current |
8.0 A |
4.5 A |
||
Power consumption |
During printing |
Maximum |
900 W |
861 W |
Average |
370 Wh |
372 Wh |
||
Average during standby mode* |
44 Wh |
48 Wh |
||
Sleep mode |
Less than 7 Wh |
Less than 7 Wh |
|
110 to 120 V Model |
220 to 240 V Model |
||
Voltage |
110 V - 120 V ± 10% |
220 V - 240 V ± 10% |
||
Rated frequency |
50 Hz - 60 Hz ± 3 Hz |
50 Hz - 60 Hz ± 3 Hz |
||
Rated current |
8.0 A |
4.5 A |
||
Power consumption |
During printing |
Maximum |
900 W |
825 W |
Average |
372 Wh |
357 Wh |
||
Average during standby mode* |
46 Wh |
48 Wh |
||
Sleep mode |
Less than 8 Wh |
Less than 8 Wh |
* When no options are installed. |
Note: |
|
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
Adobe PostScript 3
in PJL: |
POSTSCRIPT |
in EJL: |
PS |
Entity Type: |
LaserWriter |
Emulation Type: |
POSTSCRIPT-00 |
Your printer must meet the following hardware requirements to be able to use the PostScript 3 printer driver.
Minimum memory |
Recommended memory |
8 MB* |
40 MB or more |
* Printing may not be possible with this amount of memory, depending on the specifics of the job being printed. |
Previous |
Next |
Version NPD2540-00, Copyright © 2008, SEIKO EPSON CORPORATION |