|
|
|
|||||||||||||||||||||||||||||||||
Problem Solver
| Some or all of the printout is garbled | |
| Cause | What to do |
| The interface cable may not be plugged in securely. | Make sure that both ends of the interface cable are plugged in securely. |
| You may not be using the correct interface cable. | If you are using the parallel interface, make sure that the cable is a double-shielded, twisted-pair interface cable no more than six feet in length. |
|
If the printer still does not print correctly, contact your dealer or a qualified service representative. |
|
| Position of the printout is not correct | |
| Cause | What to do |
|
The page length and margins are set incorrectly in your application software. |
Make sure that you are using the correct page length and margin settings in your application software. |
| There is a page that could not be printed | |
| Cause | What to do |
|
Memory is insufficient to print. |
Graphics require large amounts of memory. To execute your job, make sure that you select the Avoid Insufficient Memory Error check box as described under Avoiding Insufficient Memory Error for Windows, or Avoiding Insufficient Memory Error for Macintosh. |
 Previous |
 Next |
| Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |
