|
|
Problem Solver
Insufficient memory for current task | |
Cause | What to do |
Printing stops due to a lack of memory. | Turn the printer off and back on again. If your computer cannot be connected in ECP mode, the printer may not be able to print with the standard memory. For information on installing more memory, see Memory Module. However, it may be necessary to reduce the contents of print jobs. |
The printer cannot print in the required quality level because of insufficient memory, and the printer lowers the quality automatically so that the printer can continue printing. |
Check to see if the printout is acceptable. If not, add more memory for a permanent solution or set Print Quality to 300 dpi in the printer driver. |
Insufficient memory to print all copies | |
Cause | What to do |
The printer does not have sufficient memory to collate print jobs. |
Only one set of copies will be printed. Reduce the contents of print jobs, or add more memory. For information on installing more memory, see Memory Module. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |