|
|
|
|||||||||||||||||||||||||||||||||
How to / Remote Control Panel Utility (Windows)
Emulation button
You have to change the printer emulation mode through the Remote Control Panel utility because the printer driver does not give you access to this setting.
The standard supported emulation modes are: LJ4 (PCL5e), PCL6, GL2, FX, ESCP2, and I239X. PS3 is also available if you install the optional Adobe PostScript 3 Kit ROM module. You can specify a different emulation for each interface; in other words, for each computer you connect the printer to.
 | Note: |
 | Settings made in the Remote Control Panel utility are not effective until you click the Send button to download the information to the printer. If you share this printer, the settings shown on your Remote Control Panel utility may not reflect the actual settings in the printer as they may have been changed by other users. Even if the Remote Control Panel Utility already shows your desired setting, always click Send to ensure that you can print with that setting. |
Clicking the Emulation button on the Remote Control Panel screen opens the following dialog box:
Allows you to specify the emulation for the parallel interface.
Allows you to specify the emulation for the USB interface.
Allows you to specify the emulation for the auxiliary interface. This option is available only when an optional Type B interface card is installed.
 Previous |
 Next |
| Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |
