|
|
Product Information / Command Summary
Page format
Text
Auxiliary functions
AGM mode
This section lists the printer commands supported in the I239X emulation mode. For more information on these commands, see IBM's 2390/2391 reference manual.
Set page length in lines |
ESC C n |
Set page length in inches |
ESC C NUL n |
Set skip perforation |
ESC N n |
Cancel skip perforation |
ESC O |
Set horizontal margins |
ESC X |
Set line space to 1/8 inch |
ESC 0 |
Set line space to 7/72 inch |
ESC 1 |
Activate line spacing for text |
ESC 2 |
Set line spacing for graphics (n/180, n/216, or n/360 inch) |
ESC 3 n |
Set line spacing for text (n/72 inch) |
ESC A n |
Set vertical units (1/180, 1/216, or 1/360 inch) |
ESC [ \ |
Set vertical tab stops |
ESC B |
Set default tab stops |
ESC R |
Set horizontal tab stops |
ESC D |
Carriage return |
CR |
Line feed |
LF |
Form feed |
FF |
Move paper vertically (n/180, n/216, or n/360 inch) |
ESC J |
Automatic line feed |
ESC 5 |
Reverse line feed |
ESC ] |
Backspace |
BS |
Space |
SP |
Horizontal tab |
HT |
Vertical tab |
VT |
Move current print position (1/120 inch) |
ESC d |
Set top of form |
ESC 4 |
Select 10 pitch font |
DC2 |
Select 12 pitch font |
ESC: |
Start 17 cpi printing |
SI |
Start 17 cpi printing |
ESC SI |
Proportional spacing |
ESC P |
Begin subscript/superscript |
ESC S |
End subscript/superscript |
ESC T |
Select font and pitch |
ESC[I |
Select print or font |
ESC I |
Select character set 2 |
ESC 6 |
Select character set 1 |
ESC 7 |
Select page code |
ESC[T |
Print one character |
ESC ^ |
Print character from a code page |
ESC \ |
Select character quality |
ESC[d |
Continuous overscore |
ESC_ |
Continuous underline |
ESC- |
Score select |
ESC[- |
Select print type style |
ESC[@ |
Begin double-width printing by line |
SO |
Begin double-width printing by line |
ESC SO |
End double-width printing by line |
DC4 |
Double-width printing |
ESC W |
Begin emphasized (bold) print |
ESC E |
End emphasized (bold) print |
ESC F |
Begin double-strike print |
ESC G |
End double-strike print |
ESC H |
Normal-density bit image graphics |
ESC K |
Double-density bit image graphics (half speed) |
ESC L |
Double-density bit image graphics (normal speed) |
ESC Y |
High-density bit image graphics |
ESC Z |
Graphic print mode |
ESC [g |
Barcode set up |
ESC [f |
Barcode transfer |
ESC [P- |
Set initial conditions |
ESC [K |
Cancel 1 line |
CAN |
Select paper tray |
ESC [F |
Set line spacing for graphics |
ESC 3 |
Set line spacing for text (n/60 inch) |
ESC A |
Move paper vertically |
ESC J |
Line feed |
LF |
Normal-density bit image graphics |
ESC K |
Double-density bit image graphics |
ESC L |
Double-density bit image graphics |
ESC Y |
High-density bit image graphics |
ESC Z |
Graphic print mode |
ESC [g |
Select graphic mode |
ESC * |
Previous |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |