|
MP tray
Lower cassette
Selecting a paper source
This section describes the combinations of paper sources and paper types that you can use.
Paper Type
|
Paper Size
|
Capacity
|
Plain paper Weight: 64 to 81.4 g/m²
|
A3, A4, A5, B5, B4, Letter (LT), Half-Letter (HLT), Executive (EXE), Government Legal (GLG), Legal (LGL), Government Letter (GLT), F4
|
Up to 30 sheets (Total thick stack: up to 3 mm)
|
Envelopes
|
C5, C6, Com-#10, DL, ISO-B5
|
Up to 5 sheets
|
Labels
|
A4, Letter (LT)
|
Up to 10 sheets
|
Thick paper Weight: 81.4 to 128 g/m²
|
A3, A4, A5, B5, B4, Letter (LT), Half-Letter (HLT), Executive (EXE), Government Legal (GLG), Legal (LGL), Government Letter (GLT), F4
|
Up to 10 sheets
|
Transparencies
|
A4, Letter (LT)
|
Up to 10 sheets
|
Custom-size paper Weight: 64 to 128 g/m²
|
100 × 148 mm minimum 297 × 420 mm maximum
|
Total thick stack: up to 2.6 mm
|
Paper Type
|
Paper Size
|
Capacity
|
Weight: 64 to 81.4 g/m²
|
A3, A4, A5, B4, B5, Letter (LT), Legal (LGL)
|
Up to 250 sheets (Total thick stack: up to 22 mm)
|
You can specify a paper source manually, or set the printer to select the paper source automatically.
You can use the printer driver to select a paper source manually. To access the printer driver, for Windows, see Accessing the printer driver, or for Macintosh, see Accessing the printer driver.
Using the printer driver:
-
For Macintosh:
Access the printer driver, select Printer Settings from the drop-down list and click the Basic Settings tab (for Mac OS X), or open the Basic Settings dialog box (for Mac OS 9). Then, select the paper source that you want to use from the Paper Source list and click OK.
You can use the printer driver to select a paper source containing the appropriate size of paper automatically. To access the printer driver, for Windows, see Accessing the printer driver, or for Macintosh, see Accessing the printer driver.
Using the printer driver:
-
For Macintosh:
Access the printer driver, select Printer Settings from the drop-down list and click the Basic Settings tab (for Mac OS X), or open the Basic Settings dialog box (for Mac OS 9). Then, select Auto Selection as the paper source and click OK.
The printer will search for a paper source containing the specified paper size in the following order.
|
Note: |
| |