Reference Guide

Index
Search
Glossary
Contents
Help

Problem Solver

Printout Problems

Printout is garbled
The printout position is not correct

Printout is garbled

Cause What to do
The interface cable may not be plugged in securely. Make sure that both ends of the interface cable are plugged in securely.
You may not be using the correct interface cable. If you are using the parallel interface, make sure that the cable is a double-shielded, twisted-pair interface cable no more than six feet in length. If you are using the USB interface, use a Revision 1.1 cable.
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified service representative.


[Top]

The printout position is not correct

Cause What to do

The page length and margins are set incorrectly in your application.

Make sure that you are using the correct page length and margin settings in your application.


[Top]


Previous

Next
Version 1.10E, Copyright © 2003, SEIKO EPSON CORPORATION