|
|
How To / Paper Handling
MP tray
Lower paper cassette
Selecting a paper source
This section describes the combinations of paper sources and paper types that you can use.
Paper Type |
Paper Size |
Capacity |
Plain paper |
A3, A4, A5,
Custom-size paper: |
Up to 150 sheets (75 g/m2) |
Envelopes |
Monarch (MON), C10, DL, C5, C6, IB5 |
Up to 10 envelopes |
Labels |
A4, Letter (LT) |
Up to 75sheets |
Thick paper/ Extra thick paper |
A3, A4, A5,
Custom-size paper: |
Total thickness: 17.50mm maximum |
Transparencies |
A4, Letter (LT) |
Up to 100 sheets |
Paper Type |
Paper Size |
Capacity |
Plain paper |
A3, A4, A5, Letter (LT) |
Up to 250 sheets |
You can specify a paper source manually, or set the printer to select the paper source automatically.
You can use the printer driver to select a paper source manually.
For Windows, access the printer driver, click the Basic Settings tab, and select the paper source that you want to use from the Paper Source list. Then click OK.
For Macintosh, access the printer driver, open the Basic Settings dialog box, and select the paper source that you want to use from the Paper Source list. Then click OK.
If you want the printer to select the paper source containing the appropriate size of paper automatically, select Auto Selection in the printer driver.
The printer will search for a paper source containing the specified paper size in the following order.
Note: |
|
|
Next |
Version 1.10E, Copyright © 2003, SEIKO EPSON CORPORATION |