|
|
Product Information / Technical Specifications
Available paper types
Paper that should not be used
Specifications
Printable area
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot guarantee the quality of any type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Paper type |
Description |
General copier paper (Recycled paper is acceptable.*) |
|
No paste and no tape No plastic window (unless specifically designed for laser printers) |
|
The backing sheet should be covered completely, with no gaps between labels. |
|
Weight: 91 to 157 g/m2 |
|
Weight: 157 to 216 g/m2 ** |
|
Transparencies for monochrome laser printers or copiers |
|
Colored paper |
Non-coated |
Paper with letterhead |
Paper and ink of letterheads must be compatible with laser printers. |
* Use recycled paper only under normal temperature and humidity conditions. Poor quality paper may reduce print quality, or cause paper jams and other problems. |
** When using extra thick paper, set the Paper Type setting in the printer driver to Extra Thick. |
You cannot use the following paper in this printer. It may cause printer damage, paper jams, and poor print quality.
Weight: |
60 to 90 g/m2, 16 to 24 lb |
Size: |
A3 (420.00 x 297.00 mm) |
Paper Sources: |
MP tray |
Size: |
Monarch (98.43 x 190.50 mm) |
Paper Source: |
MP tray only |
Size: |
A4 (210.00 x 297.00 mm) |
Paper Source: |
MP tray only |
Weight: |
91 to 157 g/m2, 24.2 to 41.8 lb |
Paper Source: |
MP tray only |
Weight: |
157 to 216 g/m2, 41.8 to 57.4 lb |
Paper Source: |
MP tray only |
Size: |
A4 (210.00 x 297.00 mm) |
Paper Source: |
MP tray only |
5-mm minimum margin on all sides
Previous |
Next |
Version 1.10E, Copyright © 2003, SEIKO EPSON CORPORATION |