|
|
Using the Control Panel
The copy station provides a variety of 1-sided and 2-sided copy modes for use with the scanner's optional Auto Document Feeder (ADF) and the printer's optional Duplex Unit.
The availability of these copy modes depends on the combination of installed options, as shown below.
|
1-sided to 1-sided |
1-sided to 2-sided |
2-sided to 1-sided |
2-sided to 2-sided |
Duplex Unit and ADF |
Enabled |
Enabled |
Enabled |
Enabled |
Duplex Unit Only |
Enabled |
Enabled |
Enabled* |
Disabled |
ADF Only |
Enabled |
Disabled |
Enabled |
Disabled |
Neither Duplex Unit nor ADF |
Enabled |
Disabled |
Enabled* |
Disabled |
* Available by manually placing each side on the document table. |
Follow these steps to select the copy mode.
Press the 1-sided/2-sided button on the Ready to Copy screen. |
Select a mode on the following screen. |
Press the OK button to apply your settings and return to the Ready to Copy screen. Press the Cancel button to return to the Ready to Copy screen without applying the copy type settings. |
If the Rotation option is turned on when a 2-sided printing mode is selected, the image printed on the back of paper is rotated 180 degrees. This is useful when making double-sided copies to be bound at the top or the bottom of the page, such as tablets or calendars.
Note: |
|
|
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |