Product Parts

a.

Auto Document Feeder (fax model only)

b.

stopper (fax model only)

c.

output tray

d.

extension tray

e.

control panel

f.

cover A

g.

MP tray

h.

power switch

i.

option cover

j.

cover B

k.

cover C

l.

ADF cover (fax model only)

a.

cover F

b.

USB interface connector

c.

telephone interface connectors (fax model only)
- LINE: Connects with the phone cord.
- EXT: Connects with an attached phone.

d.

network interface connector
(EPSON AcuLaser CX11NF/CX11N only)

e.

AC inlet

f.

cover E

g.

handle

h.

cleaner cover

a.

fuser unit

b.

photoconductor unit access lever

c.

photoconductor unit

d.

cleaning knob access lever

e.

toner cartridge

f.

paper guides (MP tray)

a.

document cover

b.

document table

c.

transportation lock

a.

One Touch Dial button
A, B, C (fax model only)

Use these buttons to transmit a fax to a registered fax number assigned to the corresponding button. Available from any mode.

b.

Data light
(Yellow)

Flashes when the product is processing data.

c.

Error light
(Red)

On or flashes when an error has occurred.

- On when an error has occurred that requires operator intervention. The product will automatically recover when the cause of the error is resolved.

- Flashing 1 (blinks at 0.3 second intervals)
Indicates an error has occurred that can be recovered by pressing either the  B&W Start or  Color Start button.

- Flashing 2 (blinks at 0.6 second intervals)
Indicates an error has occurred that requires operator intervention and the  B&W Start or  Color Start button to be pressed after resolving the error.

d.

LCD panel

Displays product status messages, guidance information, and various mode settings.

e.

 Left/  Right button

Use these buttons to sequentially display previous or next setting values. The  Right button is also used as the OK button to set and register a setting item. Also, the  Left button can be used to move the cursor one character left and overwrite mistakenly entered data.

 Up/  Down button

Use these buttons to sequentially display previous or next menu items. For instructions on how to use these buttons, see Using the Setup Menu.

f.

Advanced/Menu button

Use this button to display the advanced menu for each mode.

g.

Speed dial button
(fax model only)

Use this button to display a list of registered recipients in the LCD panel.

h.

Pause/Redial button (fax model only)

Use this button to insert a pause into fax dialing, or redial to the same fax number called previously.

i.

 B&W Start button,  Color Start button

Use these buttons to start a black-and-white or color copy, scan, or fax transmission.
When the error light is flashing, pressing this button clears the error and switches the product to ready status.

j.

 Cancel button

Use this button to stop scanning operation, or cancel copy, fax transmission and print job.
Pressing it once cancels the current job.
Pressing and holding it for more than three seconds in Print mode deletes all print jobs from the product memory.

k.

Numeric keypad

Used to enter the number of copies or a zoom value in Copy mode. Also, enters numeric values, such as the Time Setting used in fax communications, in Setup mode.
# hash and asterisk buttons can be used in Fax mode.

l.

 Reset button

Use this button to reset the selected setting item or mistakenly entered values to the default value. Press and hold it for more than three seconds to delete all setting items to their default values. Also, used as a delete button to delete one character from the entered data when entering a recipient fax number in Fax mode.

m.

Setup light

On when the product is in Setup mode.

n.

 Setup button

Use this button to switch to the Setup mode.

o.

Mode buttons

Use these buttons to switch to the corresponding mode.

p.

Mode lights

On when the corresponding mode (Print, Copy, Fax, or Scan) is selected. When the Print light is on, the product is in Print mode and ready to receive and print data.