|
|
Network Software / EpsonNet Config with Web Browser
NetWare
TCP/IP
AppleTalk
MS Network
IPP
SNMP
Time
Note: |
|
Items |
Explanations |
Use NetWare |
Enable or Disable NetWare. |
Frame Type |
Leave the default frame type (Auto) as it is. |
Mode |
Select the appropriate NetWare mode. |
Items |
Explanations |
Print Server Name |
Enter the print server name (up to 47 characters). |
Polling Interval |
Enter the polling interval in seconds. |
NetWare Password |
Enter the password (up to 20 characters) you use when you log in to the print server. |
NDS Tree Name |
Enter the NDS tree name (up to 31 characters) if the mode is NDS Print Server. |
NDS Context |
Enter the NDS context (up to 255 characters) if the mode is NDS Print Server. |
Primary File Server Name |
If the mode is Bindery Print Server, enter the file server name (up to 47 characters) where you log in to the print server. |
Items |
Explanations |
Primary Print Server Name |
Enter the primary print server name (up to 47 characters). |
Printer Port Number |
Enter the printer port number (0 to 254). |
Items |
Explanations |
Method for Acquiring the IP Address |
Select a method for acquiring IP addresses. If Auto is selected, DHCP becomes available. To use the DHCP server, make sure it is installed on your computer and correctly configured. See your operating system's online help for detailed instructions. To set the IP address manually, select Manual. |
IP Address |
Enter an IP address for the network interface. Be sure the IP address does not conflict with any other devices on the network. |
Subnet Mask |
Set the subnet mask. |
Default Gateway |
Set the gateway address if needed. |
Set Using Automatic Private IP Addressing (APIPA) |
Select Enable to get a private address between 169.254.1.1 and 169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server; otherwise, select Disable. |
Set Using PING |
Enables or disables IP address setting using the ping command. |
Items |
Explanations |
Acquire DNS Server Address Automatically |
Select either Enable or Disable to acquire the DNS server address from the DHCP server. |
DNS Server Address |
Enter the DNS server address. When the DHCP server does not respond even Enable is selected for Acquire DNS server address automatically, the DNS server address set here is used. |
Items |
Explanations |
Acquire Host Name and Domain Name Automatically |
Select either Enable or Disable to acquire the host name and domain name from the DHCP server. |
Host Name |
Enter the host name supported by Dynamic DNS (between 2 and 63 characters). The total number of characters of the host name and the domain name must not exceed 251. |
Domain Name |
Leave it blank or enter two or more characters of the domain name. The total number of characters of the host name and the domain name must not exceed 251. |
Register Network Interface Address to DNS Server |
Select Enable if you want to send the host name and the domain name to the DHCP server that supports Dynamic DNS update to request for DNS dynamic updates. |
Register Network Interface Address Directly to DNS Server |
Select Enable if you want to directly send the host name and the domain name to the DNS server that supports Dynamic DNS update to request for DNS dynamic updates.When Register the network interface's address to DNS server is Disable, then this setting is the same as Disable. |
Items |
Explanations |
Use Universal Plug and Play |
Enables or disables Universal Plug and Play. |
Device Name |
Enter the device name (between 2 and 63 characters). |
Items |
Explanations |
Use Rendezvous |
Select either Enable or Disable to use Rendezvous. |
Rendezvous Name |
Enter the Rendezvous name. |
Rendezvous Printer Name |
Enter the printer name for Rendezvous. |
Items |
Explanations |
Use AppleTalk |
Enable or Disable AppleTalk. |
Printer Name |
Enter the name of the printer attached to the network interface (up to 32 characters). |
Zone Name |
Enter the network zone name (up to 32 characters). To have the zone selected automatically, select Auto for the Network Number Set and enter an asterisk (*) in this text box. |
Entity Type |
Displays the printer's entity type. Do not change the entity type unless "epson" appears. If "epson" appears, enter an entity type to match your printer. |
Network Number Set |
Select Auto or Manual. Usually Auto is recommended. |
Network Number for Manual Mode |
Enter the network number when you select to set the Network Number manually. |
Items |
Explanations |
Use Microsoft Network Shared Printing |
Enable or Disable Microsoft network. |
Print Server Name |
Enter the print server name, which is the name of a computer on the network (up to 15 characters). Be sure to give a name that is unique on the network. |
Workgroup Name |
Enter the workgroup name or domain name (up to 15 characters). |
Share Name |
Enter the printer's shared name (up to 12 characters). LPT1, LPT2, or LPT3, or COM cannot be used. |
You must make the following settings before setting up the printer for Internet Printing on Windows Me/XP/Server 2003/2000 or using EpsonNet Internet Print on Windows 98/95/NT 4.0. See About EpsonNet Internet Print for more information.
Items |
Explanations |
IPP URL |
Displays the printer's URL for Internet Printing.
Format:
Example: |
Printer Name |
Enter the name of a printer to use for Internet Printing (up to 127 characters).
Example: |
Location |
Enter the name of the printer's physical location (up to 64 characters). |
Items |
Explanations |
Community |
Displays the community name. |
Read Only |
The word "public" always appears. |
Read/Write |
Enter the Read/Write community name (up to 32 characters). |
Items |
Explanations |
Trap |
Enable or Disable the trap. |
Address |
Enter the IP address of the server to which the trap is transmitted. |
Community |
Enter the community name (up to 32 characters). |
Port Number |
Enter the Port Number of the receive host, in decimal(0-65535). |
Items |
Explanations |
Trap |
Enable or Disable the trap. |
Address |
Enter Network Address and Node Number (MAC Address) of the server to which the trap is transmitted.
Format: Suppose Network Address is A7E00BB0 (hexadecimal) and Node Number is 000048930000 (hexadecimal). In this case, the address is A7E00BB0:000048930000. |
Community |
Enter the community name (up to 32 characters). |
Socket Number |
Enter the Socket Number of the receive host, in hexadecimal(0-FFFF). |
Items |
Explanations |
Time |
Displays the time. Click the Get Time button to reload the display. When Time Server is Enable, time is acquired from the time server. |
If the network interface has RTC (Real Time Clock), you can set the time manually.
Items |
Explanations |
Date |
Enter the year, month, and day. |
Time |
Enter the hour, minutes, and seconds. |
Time Difference |
Enter the difference between time at the present location and Greenwich Mean Time (GMT). |
Apply button |
Applies the settings. |
Items |
Explanations |
Time Server |
Select either Enable or Disable to time synchronize from the time server. |
Time Server IP Address |
Enter the IP address of the time server. |
Synchronize Interval |
Enter the time interval in minutes for automatic time synchronization. |
Time Difference |
Enter the difference between time at the present location and Greenwich Mean Time (GMT). |
Time Server Status |
Displays a connection status with the time server. |
Apply button |
Applies the settings. |
Previous |
Next |
Version NPD0752-00, Copyright © 2004, SEIKO EPSON CORPORATION |