|
|
How to / Replacing Consumable Products
When you see the following messages on the LCD panel or on the window of the EPSON Status Monitor 3 utility, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but EPSON recommends early replacement to maintain print quality and extend the life of your printer.
Control panel message |
Description |
XXXX* Toner Low |
The amount of remaining toner in the toner cartridge(s) is low. |
Worn Photoconductor |
The photoconductor unit is near the end of its service life. |
Waste T Box Nearfull |
The waste toner collector is nearly full of toner. |
* C, M, Y, and/or K are indicated for the color of the toner to be replaced. For example, the message Y Toner Low means that the amount of remaining toner in the yellow toner cartridge is low. |
Note: |
If you press the Start button, the message on the LCD panel disappears. |
If you continue to use the printer without replacing consumable products and a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of the EPSON Status Monitor 3 utility. When this happens, the printer cannot resume printing until you replace the depleted consumable products.
Control panel message |
Description |
XXXX* Toner Out |
The toner cartridge is empty. |
Replace Photocondctr |
The photoconductor unit has reached the end of its service life. |
Replace Waste T Box |
The waste toner collector is full of toner. |
* C, M, Y, and/or K are indicated for the color of the toner to be replaced. For example, the message Y Toner Out means that you need to replace the yellow toner cartridge. |
Note: |
Messages appear for each consumable product at a time. After replacing a consumable product, check the LCD panel for replacement messages for other consumable products. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |