Reference Guide

Index
Search
Glossary
Contents
Help

Product Information / Technical Specifications

Interfaces

Parallel interface
USB interface
Ethernet interface

Parallel interface

Use the IEEE 1284-I compliant parallel interface connector.

Using ECP mode

To use the EPC mode with a parallel (IEE 1284 level I compliant) interface connector, your computer must support the ECP mode.

The procedure of the mode setting on the parallel interface may differ depending on your computer. Refer to your computer's manual to adjust the mode setting on the parallel interface.


[Top]

USB interface

USB 1.1 compliant.

Note:
Only computers equipped with a USB connector and running Mac OS 8.1 to 9.X or Windows XP, Me, 98, or 2000 support the USB interface.


[Top]

Ethernet interface

You can use an IEEE 802.3 100BASE-TX/10 BASE-T straight-through shielded, twisted-pair interface cable with the RJ45 connector.


[Top]


Previous

Next
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION