|
|
Settings for NetWare Server
Supported systems
About modes
This chapter explains how to configure the Internal Print Server for NetWare. First, you need to set up the printer in a NetWare environment, and then configure the Internal Print Server using EpsonNet WinAssist.
NetWare 3.1/3.11/3.12/3.2 (Bindery)
NetWare 4.1/4.11/4.2 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare 5.0/5.1 (NDS, NDPS)
NetWare 6.0 (NDS, NDPS)
The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the Internal Print Server.
You can choose either the Print Server, Remote Printer, or Standby mode. We recommend that you select the Print Server mode unless the number of users exceeds the limit.
Features of the modes are described below.
- High-speed printing with direct printing
- Uses the NetWare user account
- Ability to connect up to 8 file servers simultaneously
- Ability to register up to 32 print queues
- A NetWare user account is not required.
- A print server is necessary to control the remote printer.
- Ability to attach up to 16 printers for NetWare 3.x, and up to 255 for NetWare 4.x or later.
Note: |
When you turn on the printer, the user account is temporarily accessed in Remote Printer mode. If there is no room in the user account, turn on the printer before connecting the client to the network. |
The Standby mode is the default mode. With this mode, all NetWare related functions stop. Use Standby mode when you are not using the Internal Print Server in a NetWare environment.
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |