|
|
Network Software / EpsonNet WebAssist
Input information
Print information
Emulation Information
Interface Information
This section explains about printer information. With EpsonNet WebAssist, you can make some of the same printer settings that you can set using the printer's control panel. See the Reference Guide for more information on each item.
Note: |
A password is required when you click items under Printer on the Configuration menu. |
Items |
Explanations |
MP Mode |
Select the priority order of paper feeding from MP Tray. |
MP Tray Paper Size |
Select the paper size for MP Tray. |
LC1 Paper Size |
Displays the currently loaded paper size in the lower paper cassette. |
LC2 and LC3 Paper Size |
If the optional Large Capacity Paper Unit is installed, the currently loaded paper size in each cassette of Large Capacity Paper Unit is displayed. |
MP Tray Paper Type |
Select the paper type for MP Tray. |
LC1 Paper Type |
Select the paper type for the lower paper cassette. |
LC2 and LC3 Paper Type |
Select the paper type for each cassette of Large Capacity Paper Unit only if the optional Large Capacity Paper Unit is installed. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Menu Selection |
Select Setup Menu. |
Interface Time Out |
Enter the length of the printer waits when it is on line and no new data is received. When this time is up, the printer searches for new print data on other channels. |
Language |
Select the displayed language. |
Panel Lock |
Select locking of the printer's control panel. If you select on, the printer's control panel is locked. |
LCD Contrast |
Adjust the contrast of the LCD display. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Menu Selection |
Select Printing Menu. |
Paper Source |
Select the paper source. |
Paper Size |
Select the paper size for printing. |
Wide A4 |
Select whether or not the printer accepts wide A4 paper for printing. |
Orientation |
Select whether the page is printed in portrait or landscape orientation. |
Out Bin |
Select the output tray for printout sheets. This item appears only if your printer supports this function. |
Copies |
Enter the number of copies to be printed. |
Manual Feed |
This item selects manual feed mode. |
Resolution |
Select the resolution. |
Skip Blank Page |
Select whether or not to skip a blank page. |
Auto Eject Page |
Select whether or not to eject pages automatically. |
Duplex |
Select whether or not to print on both sides of paper. This setting is available only when the Duplex Unit is installed. |
Binding |
Specify the binding direction of the printout. This setting is available only when the Duplex Unit is installed. |
StartPage |
Specify whether printing starts from the front or back side of the page. This setting is available only when the Duplex Unit is installed. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Menu Selection |
Select Configuration Menu. |
RITech |
Select whether or not to adjust the RITech setting. RIT produces smoother and crisper lines, text, and graphics. |
Toner Save |
Select whether or not to save toner. When on, the printer consumes less toner but print quality is reduced. |
Top Offset |
Enter a value to adjust the printing start position from the top on the paper. |
Left Offset |
Enter a value to adjust the printing start position from the left on the paper. |
Top Offset B |
Enter a value to adjust the vertical printing position on the back side when printing on both sides. Available only when the Duplex Unit is installed. |
Left Offset B |
Enter a value to adjust the horizontal printing position on the back side when printing on both sides. Available only when the Duplex Unit is installed. |
Size Ignore |
Select whether or not a paper size error is ignored. |
Auto Continue |
Select whether or not to permit the printer to automatically continue printing after a certain period of time when one of the following error occurs: paper set, print overrun, or insufficient memory error. |
Page Protect |
Select whether or not to allocate additional printer memory for printing data, as opposed to receiving it. |
Image Optimum |
Reduces the amount of graphics data when the data reaches the memory limit, allowing complex documents to be printed. |
Paper Type |
Select the paper type. |
Paper Side |
When you print on thick or extraThk paper or envelope, select the paper side to be printed. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Menu Selection |
Select Support Menu. |
Standby |
Select whether to save power, by reducing power to the fixing heater when the printer receives no data for a certain period of time. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Menu Selection |
Select Quick Print Job Menu. |
User Name |
Select the user name. The user's jobs will be listed in the print job list box. |
Job Type |
Select the job type. |
Print job list box |
The print jobs of the selected user are listed in this box. |
Refresh button |
Refreshes the status. |
Delete button |
Select a print job, and then click Delete to delete it. |
Qty |
Displays the number of copies. You can change this number. |
Print button |
Prints the selected job. |
Items |
Explanations |
Menu Selection |
Select Color Registration Menu. This menu appears only if your printer supports this function. |
Registration Sheet |
Click the Print button to print a registration sheet. |
Cyan Registration |
Set the value between -7 and 7. The default is 0. |
Magenta Registration |
Set the value between -7 and 7. The default is 0. |
Yellow Registration |
Set the value between -7 and 7. The default is 0. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Emulation |
Select PS3. This menu appears only when PS3 is installed. |
Error Sheets |
Select whether or not to print an error sheet when any error occurs while the printer is in PS3 emulation mode. |
Coloration |
Specify the printing methods from Color, Mono, or True Color. |
Image Protect |
Select whether or not to compress data when memory is low during printing. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Emulation |
Select LJ4. |
Font Source |
Select the default font source. |
Font Number |
Type the default font number from the default font source. |
Pitch |
Type the default font pitch if the font is scalable and fixed-pitch. |
Height |
Type the default font height if the font is scalable and proportional. |
Symbol Set |
Select the default symbol set. |
Form |
Type the number of lines for the selected paper size and orientation. |
Source Symbol Set |
Available only when an optional font ROM is installed. |
Dest Symbol Set |
Available only when an optional font ROM is installed. |
CR Function |
Select CR (carriage-return) or CR+LF (carriage-return/line-feed) operation whenever the print position exceeds the right margin. |
LF Function |
Select LF (line-feed) or CR+LF (carriage-return/line-feed) operation to add a line feed to each carriage return it receives. |
Tray Assign |
Select the tray assigning from 4, 4K, or 5S. When 4, 4K, and 5S are selected, LaserJet 4 Compatible, LaserJet 4000/5000/8000 Compatible, and LaserJet 5 Si Compatible are available respectively. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Emulation |
Select GL2. |
GL-Mode |
Select whether the emulation is similar to the GL/2 or the HP LaserJet 4 emulation of the GL/2. |
Scale |
Select whether the output from the software is scaled, and if so, how the scale factor is calculated: based on the output paper size of the software application. |
Origin |
Select whether the logical origin of the "plotter" is from the corner or the center of the paper. |
Pen |
Select the logical "pen" which "plots" the drawing. |
End |
Select the way in which lines end. |
Join |
Select the way in which lines are joined. |
Pen (0 to 6) |
Select the thickness of the seven "pens" used to make the printout. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Emulation |
Select ESCP2 or FX. |
Font |
Select a font which is used for printing. |
Pitch |
Select a character pitch. |
Condensed |
Use this option to change the character spacing. |
T. Margin |
Use this option to specify the distance from the top of the sheet to the baseline of the first printable line. |
Text |
Use this option to set the page length in lines. |
CG Table |
Use the character generator table option to select the graphics character table, or the italics table. |
Country |
Use this option to select one of the international symbol sets. |
Auto CR |
Use the automatic carriage return option to perform a carriage-return line-feed (CR-LF) operation whenever the print position exceeds the right margin. |
Auto LF |
When you set AutoLF to Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When on, the printer adds a line feed to each carriage return it receives. |
Bit Image |
With Bit Image set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer command. When you select Dark, the bit image density is high. When you select Light, the bit image density is low. |
Zero Char |
Select whether the printer prints a slashed zero or an unslashed zero. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Emulation |
Select 1239X. |
Font |
Select a font. |
Pitch |
Select a character pitch. |
Code Page |
Selects the character tables. Character tables contain the characters and symbols used in different languages. |
T. Margin |
Use this option to specify the distance from the top of the sheet to the baseline of the first printable line. |
Text |
Use this option to set the page length in lines. |
Auto CR |
Use the automatic carriage return option to perform a carriage-return line-feed (CR-LF) operation whenever the print position exceeds the right margin. |
Auto LF |
When you set AutoLF to Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When on, the printer adds a line feed to each carriage return it receives. |
Alt. Graphic |
Turns the Alternate Graphics option on or off. |
Bit Image |
With Bit Image set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer command. When you select Dark, the bit image density is high. When you select Light, the bit image density is low. |
Zero Char |
Select whether the printer prints a slashed zero or an unslashed zero. |
Character Set |
Select character table. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Items |
Explanations |
Parallel I/F |
Allows you to activate or deactivate the parallel interface. |
Speed |
Select the transfer speed. |
Bi-Directional |
Enable or disable bidirectional communication. |
Buffer Size |
Select the amount of memory to be used for receiving and printing data. |
Items |
Explanations |
Network I/F |
Network I/F (Internal Print Server) is always on. |
Buffer Size |
Select the amount of memory to be used for receiving and printing data. |
Items |
Explanations |
AUX I/F |
Not available unless an optional print server is installed. |
Buffer Size |
Select the amount of memory to be used for receiving and printing data. Available only when an optional print server is installed. |
Items |
Explanations |
USB I/F |
Allows you to activate or deactivate the USB interface. |
Buffer Size |
Select the amount of memory to be used for receiving and printing data. |
Set button |
Saves any changes. |
Refresh button |
Clears any changes and reloads the previous settings. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |