Administrator's Guide

Index
Search
Contents
Help

Installing Components on Your Computer

Macintosh

Macintosh (with Open Transport)
Macintosh (without Open Transport)

To print using the AppleTalk protocol and configure the Internal Print Server with EpsonNet MacAssist, you just need to select Ethernet in the AppleTalk Control Panel. Then configure the Internal Print Server with EpsonNet MacAssist. See About EpsonNet MacAssist.

If you use EpsonNet WebAssist or EpsonNet WebManager, set an IP address to your Macintosh as described below.

Macintosh (with Open Transport)

Follow the steps below to set or check the IP address.

Double-click the TCP/IP Control Panel.

Set an IP address, and change other settings if necessary.


[Top]

Macintosh (without Open Transport)

Follow the steps below to set or check the IP address.

Double-click the MacTCP Control Panel, and then check whether an IP address has been set.

If no IP address is set, click the Details button and change the necessary settings. Then, set an IP address in the MacTCP dialog box.


[Top]


Previous
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION