|
|
Product Information / Technical Specifications
Parallel interface
USB interface
Use the IEEE 1284-I compliant parallel interface connector.
To use the ECP mode with a parallel (IEE 1284 level I compliant) interface connector, your computer must support the ECP mode.
The procedure of the mode setting on the parallel interface may differ depending on your computer. Refer to your computer's manual to adjust the mode setting on the parallel interface.
USB 1.1 compliant. A USB 2.0 certified cable is recommended.
Note: |
Only computers equipped with a USB connector and running Mac OS 8.1 to 9.X or Windows XP, Me, 98, or 2000 support the USB interface. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |