Reference Guide

Index Search Glossary Contents Help Safety

Setup & Maintenance / Replacing Consumable Products

Toner Cartridge

Handling precautions

Always observe the following handling precautions when replacing toner cartridges.

• Installing a genuine toner cartridge is recommended. Using a non-genuine toner cartridge may affect print quality. EPSON shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by EPSON.

• When handling toner cartridges, always place them on a clean smooth surface.

• Do not install used toner cartridges into the printer.

• If you have moved a toner cartridge from a cool to a warm environment, wait for at least one hour before installing it to prevent damage from condensation.

Warning:

Do not touch the toner. Keep the toner away from your eyes. If toner gets on your skin or clothes, wash it off with soap and water immediately.

Keep toner cartridges out of the reach of children.

Do not dispose of used toner cartridges in fire, as they may explode and cause injury. Dispose of them according to local regulations.

If toner is spilled, use a broom and dustpan or a damp cloth with soap and water to clean it up. Because the fine particles can cause a fire or explosion if they come into contact with a spark, do not use a vacuum cleaner.

Replacing a toner cartridge

Follow these steps to replace a toner cartridge.

Confirm the color of the toner cartridge that needs to be replaced by checking the LCD panel or EPSON Status Monitor 3.

Remove the top cover.

Turn the toner cartridge knobs to the unlocked position.

Note:

Hold the knobs with both hands.

Lift the toner cartridge out of the slot.

Note:

A small amount of the toner may adhere to the bottom of the cartridge. Be careful not to spill this toner or get it on your skin or clothes.

Put the used cartridge on a flat surface with the toner spout facing up to avoid spilling the toner.

Dispose of the used toner cartridge by putting it into its disposal bag.

Take the new toner cartridge out of its package, and gently shake it from side to side and front to back to distribute the toner evenly.

Note:

Do not remove the protective tape yet.

Hold the toner cartridge as shown below, and lower it into the slot.

Turn the toner cartridge knobs to the locked position.

Note:

Hold the knobs with both hands and turn them until they click.

Caution:

Be sure to turn the knob all the way to the locked position. Otherwise, you may have toner problems or leakage.

Remove the protective tape, pulling straight up from the toner cartridge.

Replace the top cover.

[Top]

Previous

Next