Network Guide

Index	Search	Safety

Contents	Help

How To / Settings for NetWare Server

Introduction to NetWare Settings

Supported systems
About modes

This chapter explains how to configure the print server for NetWare. First, you need to set up the printer in a NetWare environment, and then configure the print server using EpsonNet WinAssist.

Supported systems

Server environment

NetWare 3.1/3.11/3.12/3.2 (Bindery)
NetWare 4.1/4.11/4.2 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare 5.0/5.1 (NDS, NDPS)
NetWare 6.0 (NDS, NDPS)

Client environment

The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the print server.

The following Novell Client is supported.

For Windows Me/98/95:
Novell Client 3.3 or higher for Windows 95/98

For Windows XP/2000/NT 4.0:
Novell Client 4.8 or higher for Windows NT/2000/XP

[Top]

About modes

You can choose either the Print Server, Remote Printer, or Standby mode. We recommend that you use the Print Server mode unless the number of users exceeds the limit.

Features of these modes are described below.

Print Server mode (NDS/Bindery Print Server):

High-speed printing with direct printing

Uses the NetWare user account

Can connect up to 8 file servers simultaneously

Can register up to 32 print queues

Remote Printer mode:

A NetWare user account is not required.

A print server is needed to control the remote printer.

Can attach up to 16 printers for NetWare 3.x, and up to 255 for NetWare 4.x or later.

Note:

When you turn on the printer, the user account is temporarily accessed in the Remote Printer mode. If there is no user account available, turn on the printer before connecting the client to the network.

Standby mode (factory default mode):

The Standby mode is the default mode. This mode disables all NetWare related functions. Use the Standby mode when you are not using the print server in a NetWare environment.

[Top]