Network Guide

Index	Search	Safety

Contents	Help

How To / EpsonNet WinAssist Configuration Utility

About EpsonNet WinAssist

EpsonNet WinAssist is a Windows-based configuration software for administrators to configure the print server for TCP/IP, NetWare, MS Network, AppleTalk, IPP, and SNMP.

Note:

Be sure to use EpsonNet WinAssist included on the Software CD-ROM shipped with this product.

EpsonNet WinAssist installed on Windows XP does not support NetBEUI as a search protocol because officially the NetBEUI protocol is not supported on Windows XP.

To set the IP address for OS/2 and UNIX, use the arp and ping commands. For more information, see Setting an IP Address Using the arp/ping Command.

If you are using the printer in a dial-up environment not running NetWare, clear the Use NetWare check box on the NetWare screen. If this check box is selected, the extra account may be charged when you use the dial-up router.

When configuring the print server for NetWare, use the IPX protocol and log in to the NetWare server or the NDS context with supervisor privileges.

When you configure the print server for NetWare 5.x, you must log in to the NetWare server using an IPX connection. If you log in to the NetWare server using an IP connection, the NetWare screen and the IPX trap setting of SNMP are not available.

[Top]