|
|
How to / Functions of the Control Panel
When to make control panel settings
How to access the control panel menus
You can use the printer's control panel to access a variety of menus that allow you to check the status of consumable products, print status sheets, and make printer settings. This section describes how to use the control panel menus, and when it is appropriate to make printer settings using the control panel.
In general, printer settings can be made from the printer driver, and do not need to be made using the control panel. In fact, printer driver settings override settings made using the control panel, so use the control panel menus only to make settings you cannot make in your software or printer driver, including the following:
This section explains how to access, use, and exit the control panel menus. Refer to the illustrations below for an overview of the control panel button functions, and see the steps later in this section for detailed instructions.
For a complete description of the items and settings available in the control panel menus, see Control Panel Menus.
When the Ready light is on, pressing any of the control panel buttons shown below accesses the control panel menus.
* Press any button to access menus.
Once you have accessed the menus, the control panel buttons function as shown below.
1. Up/Down buttons: |
Scroll through menus, items, and settings on the current level. |
2. Enter button: |
Advance to the next level, carry out indicated operations, and activate settings. |
3. Back button: |
Return to the previous level. |
4. Start/Stop button: |
Exit the control panel menus from any level. |
| Make sure the Ready light is on, then press any of the buttons indicated above to access the menus. |
|
Use the |
|
Press the |
|
Use the |
|
Press the |
Use theUp and
Down buttons to scroll through available settings, and press the
Enter button to select a setting and return to the previous level. Press the
Back button to return to the previous level without changing the setting.
Note: |
You need to turn the printer off and then on to activate some settings. For details, see Control Panel Menus. |
|
Press the |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |