|
|
Product Information / Technical Specifications
General
Environmental
Mechanical
Electrical
Standards and approvals
Printing method: |
Laser beam scanning and dry electrophotographic process |
||
Resolution: |
1200 x 1200 dpi,* 600 x 600 dpi, 300 x 300 dpi |
||
|
|
||
Continuous printing speed |
|
||
at 300/600 dpi: |
16 ppm from all paper sources 10 ppm for double-sided printing from all paper sources |
||
at 1200 dpi: |
8 ppm from all paper sources 5 ppm for double-sided printing from all paper sources |
||
First print (with A4/Letter): |
Less than 15 seconds from the MP tray Less than 15.5 seconds from the standard lower cassette |
||
Warm-up time: |
About 30 seconds at normal temperature |
||
Paper feed: |
Automatic or manual feed |
||
Paper feed alignment: |
Center alignment for all sizes |
||
Input paper supply: |
|
||
MP tray: |
Up to 100 sheets of plain paper, EPSON Color Laser Paper, and EPSON Color Laser Coated Paper Up to a 10 mm thick stack of envelopes, labels, thick paper, and transparencies |
||
Standard lower cassette: |
Up to 500 sheets of plain paper, EPSON Color Laser Paper, and EPSON Color Laser Coated Paper* |
||
|
* This media can be fed from this paper source only when Plain is selected as the Paper Type setting in the printer driver |
||
Optional Large Capacity Paper Unit: |
Up to 1,000 sheets of plain paper, EPSON Color Laser Paper, and EPSON Color Laser Coated Paper* for two cassettes, each holding up to 500 sheets |
||
|
* This media can be fed from this paper source only when Plain is selected as the Paper Type setting in the printer driver |
||
Paper output capacity: |
Up to 250 sheets (larger than B5/EXE) |
||
Internal emulation: |
HP listed LaserJet 4 emulation (LJ4 mode) |
||
|
HP-GL/2 emulation (GL2 mode) |
||
|
ESC/P2 24-pin printer emulation |
||
|
ESC/P 9-pin printer emulation (FX mode) |
||
|
IBM Proprinter emulation (I239X mode) |
||
Resident fonts: |
84 scalable fonts, and 7 bitmap fonts |
||
RAM: |
64 MB, expandable up to 1024 MB |
Temperature: |
Operation: |
10 to 32°C (50 to 89.6°F) |
Storage: |
0 to 35°C (32 to 95°F) |
|
Humidity: |
Operation: |
15 to 85% RH |
Storage: |
15 to 85% RH |
|
Altitude: |
3,100 meters (10,168 feet) maximum |
Dimensions |
Height: |
44.45 cm (17.5 in.) |
Width: |
43.94 cm (17.3 in.)* |
|
|
*When extending all trays, 72.9 cm (28.7 in.) |
|
Depth: |
63.8 cm (25.1 in.) |
|
Weight: |
Approx. 34.5 kg (76 lb) with consumables installed |
|
Durability: |
5 years or 300,000 pages, whichever comes first (under the conditions of A4 size paper, 4 pages continuous printing, 5% print ratio with color: black and white = 1:1) |
|
110 V to 120 V Model |
220 to 240 V Model |
||
Voltage |
110 V-120 V ± 10% |
220 V-240 V ± 10% |
||
Rated frequency |
50 Hz / 60 Hz ± 3 Hz |
50 Hz / 60 Hz ± 3 Hz |
||
Rated current |
Less than 8 A |
Less than 4 A |
||
Power consumption |
During printing* |
Maximum |
850 W |
850 W |
Average |
450 Wh |
450 Wh |
||
During standby mode Average |
850 Wh |
850 Wh |
||
In Energy Save mode** |
Less than 45 Wh |
Less than 45 Wh |
* Includes optional cassette unit. |
** Completely suspended. Complies with ENERGY STAR® program. |
U.S. model:
Safety |
UL 1950 |
EMC |
FCC Part 15 Subpart B Class B |
European model:
Low Voltage Directive 73/23/EEC |
EN 60950 |
Australian model:
EMC |
AS/NZS 3548 Class B |
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |