Configuration - Network Screens

Items

Explanations

NetWare

Enable or Disable NetWare.

Frame Type

Leave the default frame type (Auto) as it is.

Mode

Select the appropriate NetWare mode.

Items

Explanations

Print Server Name

Enter the print server name (up to 47 characters).

Polling Interval

Enter the polling interval in seconds.

NetWare Password

Enter the password (up to 20 characters) you use when you log in to the print server, if necessary.

NDS Tree Name

Enter the NDS tree name (up to 31 characters) if the mode is NDS Print Server.

NDS Context

Enter the NDS context (up to 255 characters) if the mode is NDS Print Server.

Primary File Server Name

If the mode is Bindery Print Server, enter the file server name (up to 47 characters) which the print server logs in.

Items

Explanations

Primary Print Server Name

Enter the primary print server name (up to 47 characters).

Printer Port Number

Enter the printer port number.

SUBMIT button

Saves any changes.

Items

Explanations

Get IP Address

Select a method for acquiring IP addresses. If Auto is selected, DHCP becomes available. To use the DHCP server, it must be installed in your computer and must be correctly configured. See your operating system's online help for detailed instructions.

To set the IP address manually, select Manual.

IP Address

Enter an IP address for the Internal Print Server if set to Manual. Be sure to give an IP address which does not conflict with any other device on the network.

Subnet Mask

Set the subnet mask.

Default Gateway

Set the gateway address if needed.

Use a private IP address when an IP address cannot be assigned by the DHCP server

Select Enable to get the private address between 169.254.1.1 and 169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server.

Set by PING

Enables or disables IP address setting using the ping command.

Universal Plug and Play

Enables or disables Universal Plug and Play.

Universal Plug and Play Device Name

Enter the device name (up to 63 characters). The first character of the device name must be an alphabet.

SUBMIT button

Saves any changes.

Items

Explanations

AppleTalk

Enable or Disable AppleTalk.

Printer Name

Enter the name of the printer attached to the Internal Print Server (up to 32 characters).

Entity Type

Displays the printer's entity type. Do not change the entity type unless "epson" is displayed. If "epson" is displayed, you need to enter the entity type to match the driver for the printer.

Zone Name

The zone is automatically selected when you enter "" for the Zone Name and select Auto for the Network Number Set.

Network Number Set

Select Auto or Manual. Usually Auto is recommended.

Network Number for Manual Mode

Enter the network number when you select to set the Network Number manually.

SUBMIT button

Saves any changes.

Items

Explanations

NetBEUI

Enable or Disable NetBEUI.

NetBIOS Name

Enter the printer's NetBIOS name which is the computer name on the network (up to 15 characters). Be sure to give a name that is unique on the network.

Workgroup Name

Enter the workgroup name or domain name (up to 15 characters).

Device Name

Enter the device name (up to 12 characters). LPT1, LPT2, or LPT3, or COM cannot be used.

SUBMIT button

Saves any changes.

Items

Explanations

IPP URL

Displays the printer's URL for Internet Printing.

Format:
http://IP address of printer:631/printer name set below

Example:
http://192.168.100.201:631/EPSON_IPP_Printer

Printer Name

Enter the printer name to use for Internet Printing (up to 127 characters).

Example:
EPSON_IPP_Printer

Location

Enter the name of the printer's physical location (up to 64 characters).

SUBMIT button

Saves any changes.

Items

Explanations

Community

Displays the community name.

Read Only

The word "public" is always displayed.

Read/Write

Enter the Read/Write community name (up to 32 characters).

SUBMIT button

Saves any changes.

Items

Explanations

Trap

Enable or Disable the trap.

Address

Enter the IP address of the server to which the trap is transmitted.

Community Name

Enter the community name (up to 32 characters).

SUBMIT button

Saves any changes.

Items

Explanations

Trap

Enable or Disable the trap.

Address

Enter the Network Address and Node Number (MAC Address) of the server to which the trap is transmitted.

Format:
Network Address: Node Number

Assume that the Network Address is A7E00BB0 (hexadecimal) and Node Number is 000048930000 (hexadecimal). In this case, the address is A7E00BB0:000048930000.

Community Name

Enter the community name (up to 32 characters).

SUBMIT button

Saves any changes.