Using the Reserve Job Function

Re-Print Job
Verify Job
Confidential Job

The Reserve Job function allows you to store print jobs on the printer’s memory and to print them later directly from the printer’s control panel. Follow the instructions in this section to use the Reserve Job function.

Note:

You need to keep sufficient RAM disk capacity in order to use the Reserve Job function. To enable RAM disk, you have to set the RAM Disk setting on the control panel to Normal or Maximum. We recommend installing an optional memory to use this function. For instructions about increasing your printer’s memory, see Installing a memory module. After installed the memory module, you have to update the information about options. See Making Optional Settings.

The table below gives an overview of the Reserve Job options. Each option is described in detail later in this section.

Reserve Job Option	Description
Re-Print Job	Lets you print the job now and store it for later reprinting.
Verify Job	Lets you print one copy now to verify the content before printing multiple copies.
Confidential Job	Lets you apply a password to the print job and save it for later printing.

Jobs stored on the printer’s memory are handled differently depending on the Reserve Job option. Refer to the tables below for details.

Reserve Job Option	Maximum Number of Jobs	When Maximum is Exceeded	When RAM Disk is Full
Re-Print Job + Verify Job	64 (combined total)	Oldest job automatically replaced with newest	Oldest job automatically replaced with newest
Confidential Job	64	Delete old jobs manually	Delete old jobs manually

Reserve Job Option	After Printing	After Turning Off Printer or Using Reset All
Re-Print Job	data remains in the printer’s memory	Data is cleared
Verify Job	data remains in the printer’s memory	Data is cleared
Confidential Job	data is cleared	Data is cleared

Re-Print Job

The Re-Print Job option allows you to store the job you are currently printing so that you can reprint it later directly from the control panel.

Follow the steps below to use the Re-Print Job option.

Click the Basic Settings tab.

Select the Collate in Printer check box. Specify the number of copies to be printed, and make other printer driver settings as appropriate for your document.

Click the Optional Settings tab, then click Reserve Job Settings. The Reserve Job Settings dialog box appears.

Note:

The Reserve Job Settings button is available only when the RAM Disk is recognized by the printer driver. If you selected Update the Printer Option Automatically on the Optional Settings tab, confirm that RAM Disk is set to Installed. If you selected Update the Printer Option Manually on the Optional Settings tab, click the Settings button and select the RAM Disk check box.

Select the Reserve Job On check box, then select Re-Print Job.

Enter a user name and job name in the corresponding text boxes.

Note:

The OK button becomes available after both the user name and job name have been entered.

If you want to create a thumbnail of the first page of a job, select the Create a thumbnail check box. Thumbnails can be accessed by entering http:// followed by the internal print server’s IP address in a Web browser.

Click OK. The printer prints your document, and stores the print job on the printer’s memory.

To reprint or delete this data using the printer’s control panel, see Printing and Deleting Reserve Job Data for instructions.

Top

Verify Job

The Verify Job option allows you to print one copy in order to verify the content before printing multiple copies.

Follow the steps below to use the Verify Job option.

Click the Basic Settings tab.

Select the Collate in Printer check box. Specify the number of copies to be printed, and make other printer driver settings as appropriate for your document.

Click the Optional Settings tab, then click Reserve Job Settings. The Reserve Job Settings dialog box appears.

Note:

Select the Reserve Job On check box, then select Verify Job.

Enter a user name and job name in the corresponding text boxes.

Note:

The OK button becomes available after both the user name and job name have been entered.

If you want to create a thumbnail of the first page of a job, select the Create a thumbnail check box. Thumbnails can be accessed by entering http:// followed by the internal print server’s IP address in a Web browser.

Click OK. The printer prints one copy of your document, and stores the print data with information on the number of remaining copies on the printer’s memory.

After you have confirmed the printout, you can print the remaining copies or delete this data using the printer’s control panel. See Printing and Deleting Reserve Job Data for instructions.

Top

Confidential Job

The Confidential Job option allows you to apply passwords to print jobs stored on the printer’s memory.

Follow the steps below to store print data using the Confidential Job option.

Make printer driver settings as appropriate for your document.

Click the Optional Settings tab, then click Reserve Job Settings. The Reserve Job Settings dialog box appears.

Note:

Select the Reserve Job On check box, then select Confidential Job.

Enter a user name and job name in the corresponding text boxes.

Set the password for the job by entering a four-digit number in the password text box.

Note:

The OK button becomes available after both the user name and job name have been entered.

Passwords must be four digits.

Only numbers from 1 through 4 can be used for passwords.

Keep passwords in a safe place. You must enter the correct password when printing a Confidential Job.

Click OK. The printer stores the print job on the printer’s memory.

To print or delete this data using the printer’s control panel, see Printing and Deleting Reserve Job Data.

Top