|
|
|
|||||||||||||||||||||||||||||||||
Problem Solver
Paper does not feed properly
| Cause | What to do |
| The paper guides are not set correctly. | Make sure that the paper guides in all the paper cassettes are set in the correct paper size positions. |
| The paper source setting may not be correct. | Make sure that you have selected the correct paper source in your application. |
| There may be no paper in the cassettes. | Load paper. |
| The size of loaded paper differs from the control panel setting. | Make sure that the correct paper size is set in the control panel's Paper Source and MP Tray Size settings. |
| Too many sheets may be loaded in the MP tray or paper cassettes. | Make sure that you have not tried to load too many sheets of paper. For the maximum paper capacity for each paper source, see MP tray. |
|
If paper does not feed from the optional 500-Sheet/1000-Sheet Paper Cassette Unit, the unit may not be installed properly. |
For instructions on installing the unit, see 500-Sheet/1000-Sheet Paper Cassette Unit. |
 Previous |
 Next |
| Version NPD0667-01, Copyright © 2004, SEIKO EPSON CORPORATION |
