Configuration - Printer Screens

Items

Explanations

MP Mode

Select the priority order of paper feeding from MP Tray.

MP Tray Paper Size

Select the paper size for MP Tray.

LC Paper Size

Displays the currently loaded paper size in the lower paper cassette if the optional Large Capacity Paper Unit is installed

MP Tray Paper Type

Select the paper type for MP Tray.

LC Paper Type

Select the paper type for the lower paper cassette only if the optional Large Capacity Paper Unit is installed.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Setup.

Interface Time Out

Enter the length of the printer waits when it is on line and no new data is received. When this time is up, the printer searches for new print data on other channels.

Language

Select the displayed language.

Panel Lock

Select locking of the printer's control panel. If you select on, the printer's control panel is locked.

Toner Out

Select whether to continue printing when the toner is out.

LCD Contrast

Adjust the contrast of the LCD display.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Printing.

Paper Source

Select the paper source.

Paper Size

Select the paper size for printing.

Wide A4

Select whether the printer accepts wide A4 paper for printing.

Orientation

Select whether the page is printed in portrait or landscape orientation.

Copies

Enter the number of copies to be printed.

Manual Feed

This item selects manual feed mode.

Resolution

Select the resolution.

Skip Blank Page

Select whether to skip a blank page.

Auto Eject Page

Select whether to eject pages automatically.

Duplex

Select whether to print on both sides of paper. This setting is available only when the Duplex Unit is installed.

Binding

Specify the binding direction of the printout. This setting is available only when the Duplex Unit is installed.

Start Page

Specify whether printing starts from the front or back side of the page. This setting is available only when the Duplex Unit is installed.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Configuration.

RITech

Select whether to adjust the RITech setting. RIT produces smoother and crisper lines, text, and graphics.

Toner Save

Select whether to save toner. When on, the printer consumes less toner but print quality is reduced.

Top Offset

Enter a value to adjust the printing start position from the top on the paper.

Left Offset

Enter a value to adjust the printing start position from the left on the paper.

Top Offset B

Enter a value to adjust the vertical printing position on the back side when printing on both sides. Available only when the Duplex Unit is installed.

Left Offset B

Enter a value to adjust the horizontal printing position on the back side when printing on both sides. Available only when the Duplex Unit is installed.

Size Ignore

Select whether a paper size error is ignored.

Auto Continue

Select whether to permit the printer to automatically continue printing after a certain period of time when one of the following error occurs: paper set, print overrun, or insufficient memory error.

Page Protect

Select whether to allocate additional printer memory for printing data, as opposed to receiving it.

Image Optimum

Reduces the amount of graphics data when the data reaches the memory limit, allowing complex documents to be printed.

Paper Type

Select the paper type.

Paper Side

When you print on thick or extraThk paper or envelope, select the paper side to be printed.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Support.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Color Registration.

Registration Sheet

Click the Print button to print a registration sheet.

Cyan Registration

Set the value between -7 and 7. The default is 0.

Magenta Registration

Set the value between -7 and 7. The default is 0.

Yellow Registration

Set the value between -7 and 7. The default is 0.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select PS3. This menu appears only when PS3 is installed.

Error Sheets

Select whether to print an error sheet when any error occurs while the printer is in PS3 emulation mode.

Coloration

Specify the printing methods from Color, Mono, or True Color.

Image Protect

Select whether to compress data when memory is low during printing.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select LJ4.

Font Source

Select the default font source.

Font Number

Type the default font number from the default font source.

Pitch

Type the default font pitch if the font is scalable and fixed-pitch.

Height

Type the default font height if the font is scalable and proportional.

Symbol Set

Select the default symbol set.

Form

Type the number of lines for the selected paper size and orientation.

Source Symbol Set

Available only when an optional font ROM is installed.

Dest Symbol Set

Available only when an optional font ROM is installed.

CR Function

Select CR (carriage-return) or CR+LF (carriage-return/line-feed) operation whenever the print position exceeds the right margin.

LF Function

Select LF (line-feed) or CR+LF (carriage-return/line-feed) operation to add a line feed to each carriage return it receives.

Tray Assign

Select the tray assigning from 4, 4K, or 5S. When 4, 4K, and 5S are selected, LaserJet 4 Compatible, LaserJet 4000/5000/8000 Compatible, and LaserJet 5 Si Compatible are available respectively.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select GL2.

GL-Mode

Select whether the emulation is similar to the GL/2 or the HP LaserJet 4 emulation of the GL/2.

Scale

Select whether the output from the software is scaled, and if so, how the scale factor is calculated: based on the output paper size of the software application.

Origin

Select whether the logical origin of the "plotter" is from the corner or the center of the paper.

Pen

Select the logical "pen" which "plots" the drawing.

End

Select the way in which lines end.

Join

Select the way in which lines are joined.

Pen (0 to 6)

Select the thickness of the seven "pens" used to make the printout.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select ESCP2 or FX.

Font

Select a font which is used for printing.

Pitch

Select a character pitch.

Condensed

Use this option to change the character spacing.

T. Margin

Use this option to specify the distance from the top of the sheet to the baseline of the first printable line.

Text

Use this option to set the page length in lines.

CG Table

Use the character generator table option to select the graphics character table, or the italics table.

Country

Use this option to select one of the international symbol sets.

Auto CR

Use the automatic carriage return option to perform a carriage-return line-feed (CR-LF) operation whenever the print position exceeds the right margin.

Auto LF

When you set AutoLF to Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When on, the printer adds a line feed to each carriage return it receives.

Bit Image

With Bit Image set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer command. When you select Dark, the bit image density is high. When you select Light, the bit image density is low.

Zero Char

Select whether the printer prints a slashed zero or an unslashed zero.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select 1239X.

Font

Select a font.

Pitch

Select a character pitch.

Code Page

Selects the character tables. Character tables contain the characters and symbols used in different languages.

T. Margin

Use this option to specify the distance from the top of the sheet to the baseline of the first printable line.

Text

Use this option to set the page length in lines.

Auto CR

Use the automatic carriage return option to perform a carriage-return line-feed (CR-LF) operation whenever the print position exceeds the right margin.

Auto LF

When you set AutoLF to Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When on, the printer adds a line feed to each carriage return it receives.

Alt. Graphic

Turns the Alternate Graphics option on or off.

Bit Image

With Bit Image set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer command. When you select Dark, the bit image density is high. When you select Light, the bit image density is low.

Zero Char

Select whether the printer prints a slashed zero or an unslashed zero.

Character Set

Select character table.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Parallel I/F

Allows you to activate or deactivate the parallel interface.

Speed

Select the transfer speed.

Bi-Directional

Enable or disable bidirectional communication.

Buffer Size

Select the amount of memory to be used for receiving and printing data.

Items

Explanations

Network I/F

Network I/F (network interface) is always on.

Buffer Size

Select the amount of memory to be used for receiving and printing data.

Items

Explanations

AUX I/F

Not available unless an optional network interface is installed.

Buffer Size

Select the amount of memory to be used for receiving and printing data. Available only when an optional network interface is installed.

Items

Explanations

USB I/F

Allows you to activate or deactivate the USB interface.

USB Speed

Select the mode, either HS or FS.

Buffer Size

Select the amount of memory to be used for receiving and printing data.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.