|
|
How to / Functions of the Control Panel
When to use SelecType
How to make the settings
SelecType menu table
In general, use SelecType only for settings you cannot make in your software or printer driver, including the following:
Keep in mind the following when using SelecType settings:
Use the buttons on the printer's control panel to enter the SelecType mode. SelecType settings appear on the LCD panel.
1. Menu
2. Item
3. Value
4. Enter
Note: |
You can directly access certain menu items using the OneTouch modes. For more information, see Using the OneTouch Modes. |
Follow these steps to enter, navigate, and exit the SelecType mode:
Press the SelecType button several times until the light above the SelecType button turns on. |
Press the Menu button to enter the SelecType mode. |
Use the Menu, Item, and Value buttons to display settings, like this: |
To display menus, press Menu.
To display items in a menu, press Item.
To display values for an item, press Value.
An asterisk () appears beside the currently activated value.
Press ALT in combination with each button to display menus, items, or values in reverse order.
See SelecType menu table for a list of SelecType menus and items.
To activate a new setting, press Enter. An asterisk () appears beside the setting. |
To exit the SelecType mode, press the On Line or SelecType button. |
See SelecType Settings for a detailed description of SelecType settings.
The following table shows the order in which SelecType menus and menu items appear on the LCD panel.
Press the Menu button to display the next menu. Press the Alt and Menu buttons to display the previous menu.
Menu |
Items |
Test Menu |
Status Sheet, Network Status Sheet, AUX Status Sheet*, PS3 Status Sheet*, PS3 Font Sample*, LJ4 Font Sample, ESCP2 Font Sample, |
Emulation Menu |
Parallel, Network, AUX* |
Printing Menu |
Paper Source, Page Size, Wide A4, Orientation, Copies, Manual Feed, Resolution, Skip Blank Page, Auto Eject Page, Duplex*, Binding*, Start Page* |
Tray Menu |
MP Mode, MP Tray Size, LC1 Size, LC2 Size*, |
Config Menu |
RITech, Toner Save, Top Offset, Left Offset, T Offset B*, L Offset B*, Size Ignore, Auto Cont, Page Protect, Image Optimum, Paper Type |
Setup Menu |
Time Out, Standby, Lang, C Toner, M Toner, |
Clock Menu |
LocalTimeDif, Year, Month, Date, Hour, Minute |
Parallel Menu |
Parallel I/F, Speed, Bi-D, Buffer Size |
Network Menu |
Network I/F, Network Config, Get IPAddress, IP Byte1, IP Byte2, IP Byte3, IP Byte4, SM Byte1, SM Byte2, SM Byte3, SM Byte4, GW Byte1, GW Byte2, GW Byte3, GW Byte4, Buffer Size |
AUX Menu* |
AUX I/F, AUX Config, Get IPAddress, IP Byte1, IP Byte2, IP Byte3, IP Byte4, SM Byte1, SM Byte2, SM Byte3, SM Byte4, GW Byte1, GW Byte2, GW Byte3, GW Byte4, NetWare, AppleTalk, NetBEUI, AUX Init, Buffer Size |
LJ4 Menu |
Font Source, Font Number, Pitch, Height, SymSet, Form, Source SymSet, Dest SymSet, |
GL2 Menu |
GL Mode, Scale, Origin, Pen, End, Join, Pen0 to Pen6 |
PS3 Menu* |
Error Sheet, Coloration, Image Protect |
ESCP2 Menu |
Font, Pitch, Condensed, T.Margin, Text, CG Table, Country, Auto CR, Auto LF, Bit Image, ZeroChar |
FX Menu |
Font, Pitch, Condensed, T.Margin, Text, CG Table, Country, Auto CR, Auto LF, Bit Image, ZeroChar |
I239X Menu |
Font, Pitch, Code Page, T.Margin, Text, Auto CR, Auto LF, Alt. Graphics, Bit Image, ZeroChar, CharacterSet |
* These items appear only when the corresponding options are installed. |
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |