|
|
Product Information / Technical Specifications
500-Sheet Paper Cassette Unit
Duplex Unit
Memory Module
Developer cartridges
Photoconductor unit
Waste toner collector
Print head filter
Fuser oil roll
Fuser kit (includes fuser unit and second transfer roll)
Transfer belt unit
Product number: |
C813461 |
Paper size: |
A4, Letter |
Paper weight: |
60 to 90 g/m2 (16 to 24 lb) |
Paper feed: |
One paper cassette mounted |
Paper feed speed |
5 pages per minute for color printing |
Paper types: |
Plain paper, EPSON Color Laser Paper, Recycled Paper |
Power supply: |
DC 5V and DC 24V supplied by the printer |
Dimensions and weight: |
|
Height: |
116 mm (4.6 inches) |
Product number: |
C813471 |
Paper size: |
A4 |
Paper weight: |
60 to 90 g/m2 (16 to 24 lb) |
Feeding speed: |
5 pages per minute in black only printing and 2.5 sheets in color printing (from the standard lower cassette to the output tray) |
Power supply: |
DC 5V and DC 24V supplied by the printer |
Dimensions and weight: |
|
Height: |
228 mm (9 inches) |
Width: |
353 mm (13.9 inches) |
Depth: |
135 mm (5.3 inches) |
Weight: |
1.7 kg (3.74 lb) |
DRAM type: |
Synchronous Dynamic RAM Dual In-line Memory Module (SDRAM DIMM) |
Memory size: |
32 MB, 64 MB, 128 MB, or 256 MB |
Type: |
168-pin type, 64 bit, with SPD* |
Access speed: |
66.66 MHz or higher (15 ns or less) |
* SPD stands for Serial Presence Detect, a chip residing on the memory module that contains information about the size, speed, and other specifications of the memory as well as manufacturer information that can be retrieved by the motherboard through electronic signals.
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: (under the conditions of A4 size paper, continuous printing, and 5% print ratio) |
Black: Up to 6,000 images |
Yellow, Magenta, Cyan: Up to 6,000 images |
The actual number of pages you can print with developer cartridges varies depending on the type of printing.
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: (under the conditions of A4 size paper, 4 pages continuous printing at 5% print ratio) |
30,000 pages for black only printing |
The actual number of pages you can print with a photoconductor unit varies depending on the type of printing.
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: |
Needs replacement at the same time as the photoconductor unit. However, you may need to replace the waste toner collector sooner than the photoconductor unit, depending on use. |
The actual number of pages you can print before replacing the waste toner collector varies depending on the type of printing.
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: (under the conditions of A4 size paper, 4 pages continuous printing at 5% print ratio) |
Needs replacement at the same time as the photoconductor unit |
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: |
21,000 pages for black only printing |
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: (under the conditions of A4 or Letter size paper, single-side printing) |
100,000 pages for black only printing |
Storage temperature: |
0 to 35 °C (32 to 95 °F) |
Storage humidity: |
30 to 85% RH |
Life: (under the conditions of A4 size paper, 4 pages at 5% print ratio) |
100,000 images |
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |