Reference Guide
|
|
How To / Replacing Consumable Products
Waste Toner Collector
Prepare a new waste toner collector for replacement when you get a message informing you to do so.
Handling precautions
Always observe the following handling precautions when replacing the waste toner collector.
-
Do not reuse toner found in the waste toner collector.
|
Warning:
|
| -
Keep the waste toner collector out of the reach of children.
|
|
| -
Do not dispose of used waste toner collector in fire, as it may explode and cause injury. Dispose of it according to local regulations.
|
|
Replacing the waste toner collector
Follow these steps to replace the waste toner collector.
|
Open the front cover.
|
|
Tilt the waste toner collector and pull it out.
|
|
Remove the two caps on the removed waste toner collector to close the two open holes with them as shown below.
|
| |
Note:
|
| |
You need to close the holes to prevent spilling the toner inside the collector.
|
|
|
Prepare the new waste toner collector.
|
|
Tilt and insert the new waste toner collector.
|
|
Close the front cover.
|
[Top]
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |