|
|
How To / Replacing Consumable Products
When you see the following messages on the LCD panel or the window of the EPSON Status Monitor 3 utility, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but EPSON recommends early replacement to maintain print quality and extend the life of your printer.
Control panel message |
Description |
XXXX Toner Low* |
The amount of remaining toner in the developer cartridge(s) is low. |
Worn Photoconductor |
The photoconductor unit is near the end of its service life. |
Waste T BoxNearfull |
The waste toner collector is nearly full of toner. |
Worn TransferUnit |
The transfer unit is near the end of its service life. |
* C, M, Y, and/or K are indicated for the color of the toner to be replaced. For example, the message Y Toner Low means that the amount of remaining toner in the yellow developer cartridge is low. |
Note: |
|
If you continue to use the printer without replacing consumable products and a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of the EPSON Status Monitor 3 utility. When this happens, the printer cannot resume printing until you replace the depleted consumable products.
Control panel message |
Description |
Replace Toner XXXX* |
The developer cartridge is empty. |
Replace Photocondctr |
The photoconductor unit has reached the end of its service life. |
Replace Waste T Box |
The waste toner collector is full of toner. |
Replace TransferUnit |
The transfer unit has reached the end of its service life. |
* C, M, Y, and/or K are indicated for the color of the toner to be replaced. For example, the message Replace Toner Y means that you need to replace the yellow developer cartridge. |
Note: |
|
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |