Administrator's Guide
|
|
Getting Started
Ethernet Operation
Status lights
Network connector
Status lights
The indicator lights (one green and one orange) provide you with important information on the operations of the Internal Print Server.
The green light is a data transmission light which flashes when the host interface receives data.
The orange light indicates whether the Internal Print Server is connected to 10Base-T or 100Base-TX. The light is on when the connection is 100Base-TX, or off when the connection is 10Base-T.
|
Note:
|
|
See the Reference Guide for the locations of the lights.
|
|
[Top]
Network connector
RJ-45 connector:
Connect a Category-5 shielded twisted pair cable to the RJ-45 connector on the Internal Print Server. You can use this cable for both 10Base-T and 100Base-TX.
|
Caution:
|
|
You must use a Category-5 shielded twisted-pair cable to connect the Internal Print Server to a network to prevent malfunctions.
|
|
[Top]
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |