Configuration - Printer screens

Items

Explanations

MP Mode

Select the priority order of paper feeding from MP Tray.

MP Tray Paper Size

Select the paper size for MP Tray.

LC1 Paper Size

Displays the currently loaded paper size in the lower paper cassette if the optional Large Capacity Paper Unit is installed

MP Tray Paper Type

Select the paper type for MP Tray.

LC1 Paper Type

Select the paper type for the lower paper cassette only if the optional Large Capacity Paper Unit is installed.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Setup Menu.

Interface Time Out

Enter the length of the printer waits when it is on line and no new data is received. When this time is up, the printer searches for new print data on other channels.

Language

Select the displayed language.

Panel Lock

Select locking of the printer's control panel. If you select on, the printer's control panel is locked.

Toner Out

Select whether or not to continue printing when the toner is out.

LCD Contrast

Adjust the contrast of the LCD display.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Printing Menu.

Paper Source

Select the paper source.

Paper Size

Select the paper size for printing.

Wide A4

Select whether or not the printer accepts wide A4 paper for printing.

Orientation

Select whether the page is printed in portrait or landscape orientation.

Copies

Enter the number of copies to be printed.

Manual Feed

This item selects manual feed mode.

Resolution

Select the resolution.

Skip Blank Page

Select whether or not to skip a blank page.

Auto Eject Page

Select whether or not to eject pages automatically.

Duplex

Select whether or not to print on both sides of paper. This setting is available only when the Duplex Unit is installed.

Binding

Specify the binding direction of the printout. This setting is available only when the Duplex Unit is installed.

StartPage

Specify whether printing starts from the front or back side of the page. This setting is available only when the Duplex Unit is installed.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Configuration Menu.

RITech

Select whether or not to adjust the RITech setting. RIT produces smoother and crisper lines, text, and graphics.

Toner Save

Select whether or not to save toner. When on, the printer consumes less toner but print quality is reduced.

Top Offset

Enter a value to adjust the printing start position from the top on the paper.

Left Offset

Enter a value to adjust the printing start position from the left on the paper.

Top Offset B

Enter a value to adjust the vertical printing position on the back side when printing on both sides. Available only when the Duplex Unit is installed.

Left Offset B

Enter a value to adjust the horizontal printing position on the back side when printing on both sides. Available only when the Duplex Unit is installed.

Size Ignore

Select whether or not a paper size error is ignored.

Auto Continue

Select whether or not to permit the printer to automatically continue printing after a certain period of time when one of the following error occurs: paper set, print overrun, or insufficient memory error.

Page Protect

Select whether or not to allocate additional printer memory for printing data, as opposed to receiving it.

Image Optimum

Reduces the amount of graphics data when the data reaches the memory limit, allowing complex documents to be printed.

Paper Type

Select the paper type.

Paper Side

When you print on thick or extraThk paper or envelope, select the paper side to be printed.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Support Menu.

Sleep Mode

Select whether to save power, by reducing power to the fixing heater when the printer receives no data for a certain period of time.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Menu Selection

Select Quick Print Job Menu.

User Name

Select the user name. The user's jobs will be listed in the print job list box.

Job Type

Select the job type.

Print job list box

The print jobs of the selected user are listed in this box.

Document

Displays the document name of the selected job.

Paper Size

Displays the paper size of the selected job.

Pages

Displays the number of pages of the selected job.

Refresh button

Refresh the status.

Delete button

Delete the selected job.

Quantity

Enter the number of copies.

Print button

Print the selected job.

Items

Explanations

Menu Selection

Select Job View Menu.

User Name

Select the user from the list.

Job List

Select the desired job from the list.

Job Name

Displays the name of the selected job.

Document

Displays the document name of the selected job.

Date

Displays the date when the selected job was sent to the printer.

Job Type

Displays the type of the selected job.

Quantity

Displays the number of copies.

Pages

Displays the number of pages of the selected job.

Paper Size

Displays the paper size of the selected job.

Prev button

Displays the previous page of the job list.

Next button

Displays the next page of the job list.

Delete button

Delete the selected job.

Quantity

Enter the number of copies.

Print button

Print the selected job.

Refresh button

Refresh the status.

Items

Explanations

Menu Selection

Select Change Toner Menu.

Toner

Select a toner: Cyan, Magenta, Yellow, or Black. Then click the Change button.

Change button

Click this button to move to the position where the toner is changed.

Items

Explanations

Emulation

Select PS3. This menu appears only when PS3 is installed.

Error Sheets

Select whether or not to print an error sheet when any error occurs while the printer is in PS3 emulation mode.

Coloration

Specify the printing methods from Color, Mono, or True Color.

Image Protect

Select whether or not to compress data when memory is low during printing.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select LJ4.

Font Source

Select the default font source.

Font Number

Type the default font number from the default font source.

Pitch

Type the default font pitch if the font is scalable and fixed-pitch.

Height

Type the default font height if the font is scalable and proportional.

Symbol Set

Select the default symbol set.

Form

Type the number of lines for the selected paper size and orientation.

Source Symbol Set

Available only when an optional font ROM is installed.

Dest Symbol Set

Available only when an optional font ROM is installed.

CR Function

Select CR (carriage-return) or CR+LF (carriage-return/line-feed) operation whenever the print position exceeds the right margin.

LF Function

Select LF (line-feed) or CR+LF (carriage-return/line-feed) operation to add a line feed to each carriage return it receives.

Tray Assign

Select the tray assigning from 4, 4K, or 5S. When 4, 4K, and 5S are selected, LaserJet 4 Compatible, LaserJet 4000/5000/8000 Compatible, and LaserJet 5 Si Compatible are available respectively.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select GL2.

GL-Mode

Select whether the emulation is similar to the GL/2 or the HP LaserJet 4 emulation of the GL/2.

Scale

Select whether the output from the software is scaled, and if so, how the scale factor is calculated: based on the output paper size of the software application.

Origin

Select whether the logical origin of the "plotter" is from the corner or the center of the paper.

Pen

Select the logical "pen" which "plots" the drawing.

End

Select the way in which lines end.

Join

Select the way in which lines are joined.

Pen (0 to 6)

Select the thickness of the seven "pens" used to make the printout.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select ESCP2 or FX.

Font

Select a font which is used for printing.

Pitch

Select a character pitch.

Condensed

Use this option to change the character spacing.

T. Margin

Use this option to specify the distance from the top of the sheet to the baseline of the first printable line.

Text

Use this option to set the page length in lines.

CG Table

Use the character generator table option to select the graphics character table, or the italics table.

Country

Use this option to select one of the international symbol sets.

Auto CR

Use the automatic carriage return option to perform a carriage-return line-feed (CR-LF) operation whenever the print position exceeds the right margin.

Auto LF

When you set AutoLF to Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When on, the printer adds a line feed to each carriage return it receives.

Bit Image

With Bit Image set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer command. When you select Dark, the bit image density is high. When you select Light, the bit image density is low.

Zero Char

Select whether the printer prints a slashed zero or an unslashed zero.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Emulation

Select 1239X.

Font

Select a font.

Pitch

Select a character pitch.

Code Page

Selects the character tables. Character tables contain the characters and symbols used in different languages.

T. Margin

Use this option to specify the distance from the top of the sheet to the baseline of the first printable line.

Text

Use this option to set the page length in lines.

Auto CR

Use the automatic carriage return option to perform a carriage-return line-feed (CR-LF) operation whenever the print position exceeds the right margin.

Auto LF

When you set AutoLF to Off, the printer does not send an automatic line feed (LF) command with each carriage return (CR). When on, the printer adds a line feed to each carriage return it receives.

Alt. Graphic

Turns the Alternate Graphics option on or off.

Bit Image

With Bit Image set to Dark or Light, your printer can correctly emulate the graphics densities set with the printer command. When you select Dark, the bit image density is high. When you select Light, the bit image density is low.

Zero Char

Select whether the printer prints a slashed zero or an unslashed zero.

Character Set

Select character table.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.

Items

Explanations

Parallel I/F

Allows you to activate or deactivate the parallel interface.

Speed

Select the transfer speed.

Bi-Directional

Enable or disable bidirectional communication.

Buffer Size

Select the amount of memory to be used for receiving and printing data.

Items

Explanations

Network I/F

Network I/F (Internal Print Server) is always on.

Buffer Size

Select the amount of memory to be used for receiving and printing data.

Items

Explanations

AUX I/F

Not available unless an optional print server is installed.

Buffer Size

Select the amount of memory to be used for receiving and printing data. Available only when an optional print server is installed.

Items

Explanations

USB I/F

Allows you to activate or deactivate the USB interface.

Buffer Size

Select the amount of memory to be used for receiving and printing data.

Set button

Saves any changes.

Refresh button

Clears any changes and reloads the previous settings.