|
|
Installing Components on Your Computer
For Windows 2000, use the following procedure to install the necessary components.
Note: |
|
|
Click Start, point to Settings, and then select Network and Dial-up Connections. The Network and Dial-up Connections screen appears. |
Right-click the desired network connection and then select Properties. |
Check if the following necessary components are in the list. If they are already installed, go to About EpsonNet WinAssist. |
The following table lists the components required for configuring the Internal Print Server with EpsonNet WinAssist.
EpsonNet WinAssist's setting screens |
Necessary components |
TCP/IP, AppleTalk, IPP, SNMP (IP trap) |
Internet Protocol (TCP/IP) |
NetBEUI |
NetBEUI |
NetWare, SNMP (IPX trap) |
NetWare Client such as Client32 or IntranetWare Client |
Note: |
|
The following table lists the components required for network printing.
Printing method |
Necessary components |
LPR or Internet printing |
Internet Protocol (TCP/IP) |
Microsoft Network Shared printing |
Internet Protocol (TCP/IP) or NetBEUI |
Printing via NetWare server |
Some examples of Microsoft components are: |
If the necessary components are not in the list, click Install to install them, as described below. |
For LPR or Internet printing:
Select Protocol and then click Add. In the Select Network Protocol dialog box, select Internet Protocol (TCP/IP) and then click OK.
For Microsoft Network Shared printing:
To use Internet Protocol, see the description described earlier to install Internet Protocol (TCP/IP).
To use NetBEUI, select Protocol and then click Add. Select NetBEUI Protocol and then click OK.
Select Client and then click Add. Select Client for Microsoft Networks and then click OK.
For printing via NetWare server:
Select Protocol and then click Add. Select NWLink IPX/SPX/NetBIOS Compatible Transport Protocol and then click OK.
Select Client and then click Add. Select Client Service for NetWare and then click OK.
For LPR, Internet, Microsoft Network Shared printing: Double-click Internet Protocol (TCP/IP) on the Configuration menu to open the TCP/IP Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. |
Restart the computer. |
The necessary components are now installed. Go to About EpsonNet WinAssist.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |