|
|
Installing Components on Your Computer
For Windows XP, use the following procedure to install the necessary components.
Note: |
|
|
Click Start and then Control Panel. Click Network and Internet Connections, and then select Network Connections. |
Under LAN or High-Speed Internet, click the Local Area Connection icon. |
Under Network Tasks, click Change settings of this connection. |
Check if the following necessary components are in the list. If they are already installed, go to About EpsonNet WinAssist. |
The following table lists the components required for network printing.
Printing method |
Necessary components |
LPR or Internet printing |
Internet Protocol (TCP/IP) |
Microsoft Network Shared printing |
Internet Protocol (TCP/IP) |
Printing via NetWare server |
Some examples of Microsoft components are: |
If the necessary components are not in the list, click Install to install them, as described below. |
For LPR or Internet printing:
Internet Protocol (TCP/IP) is installed by default. You cannot add or delete it.
For Microsoft Network Shared printing:
Select Client and then click Add. Select Client for Microsoft Networks and then click OK.
For printing via NetWare server:
Select Service and then click Add. Select Service Advertising Protocol and then click OK. NWLink IPX/SPX/NetBIOS Compatible Transport Protocol is installed.
Select Client and then click Add. Select Client Service for NetWare and then click OK.
For LPR, Internet, Microsoft Network Shared printing: Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. |
Restart the computer. |
The necessary components are now installed. Go to About EpsonNet WinAssist.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |