|
|
|
|||||||||||||||||||||||||||||||||
Problem Solver
| Some or all of the printout is garbled. | |
| Cause | What to do |
| The interface cable may not be plugged in securely. | Check both ends of the interface cable between the printer and the computer. If you are using the parallel interface, be sure to secure the connector using the wire retaining clips. |
| You may not be using the correct interface cable. | Make sure that you use a double-shielded, twisted-pair parallel interface cable no more than six feet in length or USB 2.0 certified cable. |
|
If the printer still does not print correctly, contact your dealer or a qualified service representative. |
|
| Position of the printout is not correct. | |
| Cause | What to do |
|
The page length and margins are set incorrectly in your application software. |
Make sure that you are using the correct page length and margin settings in your application software. |
| Graphics don't print correctly. | |
| Cause | What to do |
|
You may need more memory. |
Graphics require large amounts of memory. For more information, see Memory Problems. |
 Previous |
 Next |
| Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |
